|
|
Content .. 1134 1135 1136 1137 ..
SE-82 < DTC/CIRCUIT DIAGNOSIS > SEAT CUSHION THERMAL ELECTRIC UNIT SENSOR 4. Check continuity between climate controlled seat control unit harness connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace harness. 4. CHECK SEAT CUSHION THERMAL ELECTRIC UNIT SENSOR Check seat cushion thermal electric unit sensor. . Is the inspection result normal? YES >> GO TO 5. NO >> Replace seat cushion thermal electric unit. 5. CHECK INTERMITTENT INCIDENT GI-40, "Intermittent Incident" >> INSPECTION END Component Inspection INFOID:0000000006217403 1. CHECK SEAT CUSHION THERMAL ELECTRIC UNIT SENSOR 1. Turn ignition switch OFF. 2. Disconnect seat cushion thermal electric unit connector. 3. Check resistance between seat cushion thermal electric unit terminals. * : When sensor temperature is 25 ° C (77 ° F). Is the inspection result normal? YES >> INSPECTION END NO >> Replace seat cushion thermal electric unit. Refer to SE-117, "CLIMATE CONTROLLED SEAT UNIT : Disassembly and Assembly" . Climate controlled seat control unit Seat cushion thermal electric unit Continuity Connector Terminal Connector Terminal Driver side B509 70 B505 70 Existed Passenger side B519 B515 Climate controlled seat control unit Ground Continuity Connector Terminal Driver side B509 70 Not existed Passenger side B519 Seat cushion thermal electric unit Resistance (K Ω ) (Approx.) Terminal 69 70 1 * |