Content .. 1090 1091 1092 1093 ..
Infiniti QX56 (Z62). Manual - part 1092
PRECAUTIONS
SCS-5
< PRECAUTION >
[HBMC]
C
D
F
G
H
I
J
K
L
M
A
B
SCS
N
O
P
5.
When the repair work is completed, re-connect both battery cables. With the brake pedal released, turn
the push-button ignition switch from ACC position to ON position, then to LOCK position. (The steering
wheel will lock when the push-button ignition switch is turned to LOCK position.)
6.
Perform self-diagnosis check of all control units using CONSULT-III.
Precaution for Procedure without Cowl Top Cover
INFOID:0000000006256138
When performing the procedure after removing cowl top cover, cover
the lower end of windshield with urethane, etc.
Precaution for Hydraulic Body-Motion Control System
INFOID:0000000006255996
WARNING:
• Always check the piping for loose connections, damage, or twists before starting operation, since
pressure in hydraulic circuit becomes high during air bleeding operation.
• When repairing or replacing a malfunctioning part, always release pressure from hydraulic circuit,
since dangerous conditions may be created when oil leakage occurs during air bleeding operation.
• Clean surrounding areas of oil inlet and air bleeder using steam before starting operation, since there may
be mud on it.
• Always decrease pressure when removing a system related part, since system pressure is high.
• Seal the removed part using vinyl tape for preventing dirt from getting on or entering the removed part.
• Check system pressure again 1 day or more after bleeding operation is complete, since system pressure
may decrease when air bleeding is insufficient.
• Use Genuine NISSAN Hydraulic Suspension Fluid for suspension fluid.
• Never reuse drained suspension fluid.
• Check for suspension fluid leakage after removing a system-related part.
PIIB3706J