Infiniti M45 (Y34). Manual - part 674

SERVICE DATA AND SPECIFICATIONS (SDS)

LU-13

C

D

E

F

G

H

I

J

K

L

M

A

LU

SERVICE DATA AND SPECIFICATIONS (SDS)

PFP:00030

Standard and Limit

ABS000MG

OIL PRESSURE

OIL PUMP

Unit: mm (in)

REGULATOR VALVE

Unit: mm (in)

ENGINE OIL CAPACITY (APPROXIMATELY)

Unit: 

 (US qt, Imp qt)

Tightening Torque

ABS000MH

                                                                                                                                                                                  Unit: N·m (kg-m, ft-lb)
                                                                                                                                                                                  Unit: N·m (kg-m, in-lb)*

Engine speed

rpm 

Approximate discharge pressure

kPa (kg/cm

2

 , psi) 

Idle speed

2,000

98 (1.0, 14) or more

294 (3.0, 43) or more 

Oil pump body to outer rotor radial clearance

0.114 - 0.200 (0.0045 - 0.0079)

Inner rotor to outer rotor tip clearance

Below 0.180 (0.0071)

Oil pump body to inner rotor side clearance

0.030 - 0.070 (0.0012 - 0.0028)

Oil pump body to outer rotor side clearance

0.030 - 0.090 (0.0012 - 0.0035)

Inner rotor to brazed portion of housing clearance

0.045 - 0.091 (0.0018 - 0.0036)

Regulator valve to oil pump body clearance

0.040 - 0.097 (0.0016 - 0.0038)

With oil filter change

5.6 (5-7/8, 4-7/8)

Without oil filter change

5.0 (5-1/4, 4-3/8)

Dry engine (engine overhaul)

6.7 (7-1/8, 5-7/8)               

Oil pressure switch

12.3 - 17.2 (1.25 - 1.75,10 - 12)

Oil pan drain plug

29.4 - 39.2 (3.0 - 4.0, 22 - 28)

Oil filter

14.7 - 20.6 (1.5 - 2.1. 11 - 15)              

Oil pump body

8.1 - 9.5 (0.83 - 0.96, 72 - 84)*

Oil pump cover

5.9 - 7.9 (0.61 - 0.80, 53 - 69)*

Regulator plug

39.2 - 68.6 (4.0 - 6.9, 29 - 50)

LU-14

SERVICE DATA AND SPECIFICATIONS (SDS)

MA-1

MAINTENANCE

L  MAINTENANCE

CONTENTS

C

D

E

F

G

H

I

J

K

M

SECTION 

MA

A

B

MA

MAINTENANCE

PRECAUTIONS .......................................................... 2

Precautions for Supplemental Restraint System 
(SRS) “AIR BAG” and “SEAT BELT PRE-TEN-
SIONER” .................................................................. 2

PREPARATION ........................................................... 3

Special Service Tools  ............................................... 3
Commercial Service Tools ........................................ 3

GENERAL MAINTENANCE  ....................................... 4

Explanation of General Maintenance  ....................... 4

PERIODIC MAINTENANCE  ....................................... 6

Introduction of Periodic Maintenance  ....................... 6
Schedule 1  ............................................................... 6

EMISSION CONTROL SYSTEM MAINTE-
NANCE .................................................................. 6
CHASSIS AND BODY MAINTENANCE  ............... 7

Schedule 2  ............................................................... 8

EMISSION CONTROL SYSTEM MAINTE-
NANCE .................................................................. 8
CHASSIS AND BODY MAINTENANCE  ............... 9

RECOMMENDED FLUIDS AND LUBRICANTS  ...... 10

Fluids and Lubricants  ............................................. 10
SAE Viscosity Number  ............................................11

GASOLINE ENGINE OIL  .....................................11

Anti-Freeze Coolant Mixture Ratio  ..........................11

ENGINE MAINTENANCE  ......................................... 12

Checking Drive Belts  .............................................. 12
Tension Adjustment ................................................ 12
Changing Engine Coolant  ...................................... 12

DRAINING ENGINE COOLANT  ......................... 12
REFILLING ENGINE COOLANT  ........................ 13
FLUSHING COOLING SYSTEM ......................... 14

Checking Fuel Lines ............................................... 14
Changing Air Cleaner Filter .................................... 14

VISCOUS PAPER TYPE ..................................... 14

Changing Engine Oil  .............................................. 15
Changing Oil Filter  ................................................. 16

REMOVAL ........................................................... 16
INSTALLATION ................................................... 16
INSPECTION AFTER INSTALLATION  ............... 16

Changing Spark Plugs (Platinum-Tipped Type)  ..... 16

REMOVAL ........................................................... 16
INSPECTION AFTER REMOVAL  ....................... 17
INSTALLATION ................................................... 17

Checking EVAP Vapor Lines  .................................. 18
Checking Cooling Fan Fluid Level and Lines  ......... 18

CHASSIS AND BODY MAINTENANCE  ................... 19

Checking Exhaust System ...................................... 19
Checking A/T Fluid  ................................................. 19
Changing A/T Fluid ................................................. 20
Checking Differential Gear Oil  ................................ 21
Changing Differential Gear Oil ................................ 22
Balancing Wheels (Bonding Weight Type)  ............. 22

REMOVAL ........................................................... 22
WHEEL BALANCE ADJUSTMENT ..................... 22

Tire Rotation  ........................................................... 23
Checking Brake Fluid Level and Leaks  .................. 24
Checking Brake Lines and Cables  ......................... 24
Changing Brake Fluid  ............................................. 24
Checking Disc Brake  .............................................. 24

ROTOR ................................................................ 24
CALIPER ............................................................. 25
PAD ..................................................................... 25

Checking Steering Gear and Linkage ..................... 25

STEERING GEAR  ............................................... 25
STEERING LINKAGE  ......................................... 25

Checking Power Steering Fluid and Lines .............. 25
Axle and Suspension Parts  .................................... 26
Lubricating Locks, Hinges and Hood Latch  ............ 26
Checking Seat Belts, Buckles, Retractors, Anchors 
and Adjusters .......................................................... 27
ASCD Vacuum Hose  .............................................. 27

SERVICE DATA AND SPECIFICATIONS (SDS)  ...... 28

Standard and Limit .................................................. 28

BELT DEFLECTION AND TENSION  .................. 28
CAPACITY ........................................................... 28
RADIATOR .......................................................... 28
ENGINE OIL CAPACITY (APPROXIMATELY)  .... 28
SPARK PLUG (PLATINUM-TIPPED TYPE)  ........ 28
WHEEL BALANCE  .............................................. 28

Tightening Torque  ................................................... 28

MA-2

PRECAUTIONS

PRECAUTIONS

PFP:00001

Precautions for Supplemental Restraint System (SRS) “AIR BAG” and “SEAT 
BELT PRE-TENSIONER”

ALS000QF

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.

WARNING:

●

To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.

●

Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.

●

Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.