|
|
DTC P0441 EVAP CONTROL SYSTEM EC-325 C D E F G H I J K L M A EC DTC P0441 EVAP CONTROL SYSTEM PFP:14950 System Description EBS00ME9 NOTE: In this evaporative emission (EVAP) control system, purge flow occurs during non-closed throttle conditions. On Board Diagnosis Logic EBS00MEA Under normal conditions (non-closed throttle), sensor output voltage indicates if pressure drop and purge flow DTC Confirmation Procedure EBS00MEB CAUTION: Always drive vehicle at a safe speed. NOTE: ° C (41 ° F) or more. WITH CONSULT-II 1. Start engine and warm it up to normal operating temperature. 2. Turn ignition switch “OFF” and wait at least 10 seconds. 3. Start engine and let it idle for at least 70 seconds. 4. Select “PURG FLOW P0441” of “EVAPORATIVE SYSTEM” in “DTC CONFIRMATION” mode with CON- 5. Touch “START”. SEF323U DTC No. Trouble diagnosis name DTC detecting condition Possible cause P0441 EVAP control system EVAP control system does not operate ● EVAP canister purge volume control solenoid ● EVAP control system pressure sensor and ● Loose, disconnected or improper connection ● Blocked rubber tube ● Cracked EVAP canister ● EVAP canister purge volume control solenoid ● Accelerator pedal position sensor ● Blocked purge port ● EVAP canister vent control valve |