|
|
Content .. 1318 1319 1320 1321 ..
P0732 A/T 2ND GEAR FUNCTION TM-133 < COMPONENT DIAGNOSIS > [5AT: RE5R05A] C E F G H I J K L M A B TM N O P 3. Keep the current driving status for at least 5 consecutive seconds if CONSULT-III screen changes from CAUTION: If “TESTING” does not appear on CONSULT-III for a long time, select “SELF-DIAG RESULTS”. In TM-112, "CONSULT-III Function (TRANSMISSION)" With GST 1. Drive vehicle and maintain the following conditions for at least 5 consecutive seconds. 2. Check DTC. Is “STOP VEHICLE” or “COMPLETED RESULT NG” displayed? / Is “P0732” detected? YES-1 >> “STOP VEHICLE”: GO TO 3. YES-3 >> “P0732” is detected: Go to NO >> Check intermittent incident. Refer to GI-38, "Intermittent Incident" . 3. CHECK SYMPTOM 2 With CONSULT-III 1. Stop vehicle. 2. Drive vehicle in “D” position allowing it to shift from 1st to 5th gear and check shift timing and shift shock. Is the inspection result normal? YES >> Check intermittent incident. Refer to GI-38, "Intermittent Incident" . NO >> Confirm malfunction phenomena by “ROAD TEST” to repair malfunctioning part. Refer to Diagnosis Procedure INFOID:0000000001672146 1. CHECK TCM POWER SUPPLY AND GROUND CIRCUIT Check TCM power supply and ground circuit. Refer to Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace damaged parts. 2. REPLACE CONTROL VALVE WITH TCM 1. Replace control valve with TCM. Refer to . 2. Perform “DTC CONFIRMATION PROCEDURE”. Refer to . Is the inspection result normal? YES >> INSPECTION END NO >> Confirm malfunction phenomena by “ROAD TEST” to repair malfunctioning part. Refer to Manual mode switch : ON Gear position : “2” position Accelerator opening : 0.6/8 or more Vehicle speed : 10 km/h (6 MPH) or more |