|
|
Content .. 1206 1207 1208 1209 ..
SRC-82 < COMPONENT DIAGNOSIS > B1106, B1107, B1108, B1109, B1110, B1111 DIAGNOSIS SENSOR UNIT >> GO TO 2. 2. CHECK AIR BAG WARNING LAMP Check the warning lamp status. Is malfunctioning part detected? YES >> Refer to . NO >> INSPECTION END. Diagnosis Procedure (Component diagnosis) INFOID:0000000001694574 With CONSULT-lll WARNING: • Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least 3 min- utes. (To discharge backup capacitor.) • Do not use unspecified tester or other measuring device. DIAGNOSTIC PROCEDURE 1. CHECK HARNESS CONNECTOR Check the connection of harness connector. Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace harness connectors. 2. CHECK WIRING HARNESS Check the wiring harness externals. Is the inspection result normal? YES >> GO TO 3. NO >> Replace wiring harness. 3. CHECK DIAGNOSIS SENSOR UNIT 1. Replace diagnosis sensor unit (ACU). 2. Check the screen of CONSULT-III. Is the inspection result normal? YES >> INSPECTION END. NO >> Check the intermittent incident. Refer to GI-38, "Intermittent Incident" . |