|
|
Content .. 1178 1179 1180 1181 ..
ENGINE DOES NOT START WITH INTELLIGENT KEY SEC-217 < SYMPTOM DIAGNOSIS > [INTELLIGENT KEY SYSTEM] C D E F G H I J L M A B SEC N O P ENGINE DOES NOT START WITH INTELLIGENT KEY Description INFOID:0000000001715887 • Before performing the diagnosis in the following table, check “Work Flow”. Refer to . • Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and check each symptom. Conditions of Vehicle (Operating Conditions) • “ENGINE START BY I-KEY” in “WORK SUPPORT” is ON when setting on CONSULT-III. Diagnosis Procedure INFOID:0000000001715888 1. CHECK BCM POWER SUPPLY AND GROUND CIRCUIT Check BCM power supply and ground circuit. SEC-119, "BCM : Diagnosis Procedure" Is the inspection normal? YES >> GO TO 2. NO >> Repair or replace malfunctioning parts. 2. CHECK IPDM E/R POWER SUPPLY AND GROUND CIRCUIT Check IPDM E/R power supply and ground circuit. SEC-119, "IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM) : Diagno- Is the inspection normal? YES >> GO TO 3. NO >> Repair or replace malfunctioning parts. 3. CHECK PUSH-BUTTON IGNITION SWITCH Check push-button ignition switch. PCS-71, "Component Function Check" Is the inspection normal? YES >> GO TO 4 (M/T models). NO >> Repair or replace malfunctioning parts. 4. CHECK ASCD OR ICC CLUTCH SWITCH FOR M/T MODELS Check ASCD or ICC clutch switch. SEC-124, "Component Function Check" Is the inspection normal? YES >> GO TO 5. NO >> Repair or replace malfunctioning parts. 5. CONFIRM THE OPERATION Confirm the operation again. Is the inspection normal? YES >> Check intermittent incident. Refer to GI-38, "Intermittent Incident" . NO >> GO TO 1. |