|
|
AV POWER SUPPLY AND GROUND CIRCUIT AV-161 < COMPONENT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION] C D E F G H I J K L M B A O P 2. CHECK POWER SUPPLY CIRCUIT (CONTINUITY) 1. Turn ignition switch OFF. 2. Disconnect the harness connector between display unit and AV control unit. 3. Check continuity between display unit harness connector M71 and AV control unit harness connector 4. Check continuity between display unit harness connector M71 and ground. Is the inspection result normal? YES >> GO TO 3. NO >> Repair harness or connector. 3. CHECK POWER SUPPLY CIRCUIT (AV CONTROL UNIT SIDE) 1. Connect the AV control unit harness connector. 2. Turn ignition switch ACC. 3. Check voltage between AV control unit harness connector and ground. Is the inspection result normal? YES >> INSPECTION END NO >> Replacement of AV control unit. 4. CHECK GROUND CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect display unit connector. 3. Check continuity between display unit harness connectors and ground. Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector. MULTIFUNCTION SWITCH MULTIFUNCTION SWITCH : Diagnosis Procedure INFOID:0000000001559287 1. CHECK FUSE Check for blown fuses. Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate cause of malfunction before installing new fuse. Signal name Display unit (M71) AV control unit (M83) Continuity Inverter VCC 2 59 Existed Signal VCC 3 47 Existed Signal name Display unit (M71) — Continuity Inverter VCC 2 Ground Not existed Signal VCC 3 Ground Not existed Signal name Connector No. Terminal No. Ignition switch position Value (Approx.) Inverter VCC M83 59 ACC 9 V Signal VCC 47 Signal name Connector No. Terminal No. Ignition switch position Continuity Ground M71 1 OFF Existed Power source Fuse No. Ignition switch ACC or ON 19 |