|
|
EXL-78 < COMPONENT DIAGNOSIS > [XENON TYPE] TURN SIGNAL LAMP CIRCUIT Is the measurement value normal? YES >> GO TO 3. NO >> Replace BCM. 3. CHECK TURN SIGNAL LAMP OPEN CIRCUIT 1. Turn the ignition switch OFF. 2. Disconnect BCM connector. 3. Check the voltage between the BCM harness connector and the front combination lamp or the rear com- Does continuity exist? YES >> GO TO 4. NO >> Repair the harnesses or connectors. 4. CHECK TURN SIGNAL LAMP SHORT CIRCUIT Check continuity between the BCM harness connector and the ground. Does continuity exist? Terminals Test item Voltage (Approx.) (+) ( − ) BCM Ground FLASHER Connector Terminal Front M119 17 LH or RH Front 18 Rear M120 20 OFF 0 V Rear 25 PKID0926E BCM Front combination lamp / Rear combination lamp Continuity Connector Terminal Connector Terminal Front M119 17 E28 6 Existed Front 18 E58 Rear M120 20 B67 3 Rear 25 B60 BCM Ground Continuity Connector Terminal Front RH M119 17 Not existed Front LH 18 Rear RH M120 20 Rear LH 25 |