Infiniti G35 (V35) Sedan. Manual - part 568

 

  Index      Infiniti     Infiniti G35 (V35) Sedan - service repair manual 2007 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  566  567  568  569   ..

 

 

Infiniti G35 (V35) Sedan. Manual - part 568

 

 

EC-418

< COMPONENT DIAGNOSIS >

[VQ35HR]

P1574 ASCD VEHICLE SPEED SENSOR

NO

>> Perform trouble shooting relevant to DTC indicated.

2.

CHECK DTC WITH “ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)”

Refer to 

BRC-26, "CONSULT-III Function (ABS)"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace.

3.

CHECK DTC WITH “UNIFIED METER AND A/C AMP.”

Refer to 

MWI-37, "CONSULT-III Function (METER/M&A)"

.

>> INSPECTION END

P1574 ICC VEHICLE SPEED SENSOR

EC-419

< COMPONENT DIAGNOSIS >

[VQ35HR]

C

D

E

F

G

H

I

J

K

L

M

A

EC

N

P

O

P1574 ICC VEHICLE SPEED SENSOR

Description

INFOID:0000000000956820

The ECM receives two vehicle speed signals via CAN communication line. One is sent from “unified meter and
A/C amp.”, and the other is from TCM (Transmission control module). The ECM uses these signals for ICC
control. Refer to 

CCS-16, "System Description"

 for ICC functions.

DTC Logic

INFOID:0000000000956821

DTC DETECTION LOGIC

NOTE:
• If DTC P1574 is displayed with DTC U1000, U1001, first perform the trouble diagnosis for DTC U1000,

U1001. Refer to 

EC-137, "DTC Logic"

.

• If DTC P1574 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer

to 

EC-138, "DTC Logic"

.

• If DTC P1574 is displayed with DTC P0500, first perform the trouble diagnosis for DTC P0500. Refer

to 

EC-328, "DTC Logic"

.

• If DTC P1574 is displayed with DTC P0605, first perform the trouble diagnosis for DTC P0605.  Refer

to 

EC-338, "DTC Logic"

.

DTC CONFIRMATION PROCEDURE

1.

PRECONDITIONING

If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.

>> GO TO 2.

2.

PERFORM DTC CONFIRMATION PROCEDURE

1.

Start engine (VDC switch OFF).

2.

Drive the vehicle at more than 40 km/h (25 MPH).

CAUTION:

Always drive vehicle at a safe speed.
NOTE:
This procedure may be conducted with the drive wheels lifted in the shop or by driving the vehicle.
If a road test is expected to be easier, it is unnecessary to lift the vehicle.

3.

Check DTC.

Is DTC detected?

YES

>> Go to 

EC-419, "Diagnosis Procedure"

.

NO

>> INSPECTION END

Diagnosis Procedure

INFOID:0000000000956822

1.

CHECK DTC WITH TCM

Check DTC with TCM. Refer to 

TM-110, "Diagnosis Description"

.

Is the inspection result normal?

YES

>> GO TO 2.

DTC No.

Trouble diagnosis 

name

DTC detecting condition

Possible cause

P1574

ICC vehicle speed 
sensor

ECM detects a difference between two vehicle 
speed signals is out of the specified range.

• Harness or connectors

(The CAN communication line is open or 
shorted.)

• Unified meter and A/C amp.
• ABS actuator and electric unit (control unit)
• Wheel sensor
• TCM
• ECM

EC-420

< COMPONENT DIAGNOSIS >

[VQ35HR]

P1574 ICC VEHICLE SPEED SENSOR

NO

>> Perform trouble shooting relevant to DTC indicated.

2.

CHECK DTC WITH “ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)”

Refer to 

BRC-26, "CONSULT-III Function (ABS)"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace.

3.

CHECK DTC WITH “UNIFIED METER AND A/C AMP.”

Check combination meter function.
Refer to 

MWI-37, "CONSULT-III Function (METER/M&A)"

.

>> INSPECTION END

P1715 INPUT SPEED SENSOR (TURBINE REVOLUTION SENSOR)

EC-421

< COMPONENT DIAGNOSIS >

[VQ35HR]

C

D

E

F

G

H

I

J

K

L

M

A

EC

N

P

O

P1715 INPUT SPEED SENSOR (TURBINE REVOLUTION SENSOR)

Description

INFOID:0000000000956823

ECM receives turbine revolution sensor signal from TCM through CAN communication line. ECM uses this
signal for engine control.

DTC Logic

INFOID:0000000000956824

DTC DETECTION LOGIC

NOTE:
• If DTC P1715 is displayed with DTC U1000, U1001 first perform the trouble diagnosis for DTC U1000,

U1001. Refer to 

EC-137, "DTC Logic"

.

• If DTC P1715 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer

to 

EC-138, "DTC Logic"

.

• If DTC P1715 is displayed with DTC P0605, first perform the trouble diagnosis for DTC P0605. Refer

to 

EC-338, "DTC Logic"

.

• If DTC P1715 is displayed with DTC P0335, first perform the trouble diagnosis for DTC P0335. Refer

to 

EC-254, "DTC Logic"

.

• If DTC P1715 is displayed with DTC P0340, first perform the trouble diagnosis for DTC P0340. Refer

to 

EC-258, "DTC Logic"

.

Diagnosis Procedure

INFOID:0000000000956825

1.

CHECK DTC WITH TCM

Check DTC with TCM. Refer to 

TM-110, "Diagnosis Description"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Perform trouble shooting relevant to DTC indicated.

2.

REPLACE TCM

Replace TCM.

>> INSPECTION END

DTC No.

Trouble diagnosis name

DTC detecting condition

Possible cause

P1715

Input speed sensor
(Turbine revolution sen-
sor)
(TCM output)

Turbine revolution sensor signal is differ-
ent from the theoretical value calculated 
by ECM from revolution sensor signal and 
engine rpm signal.

• Harness or connectors

(The CAN communication line is open or short-
ed)

• Harness or connectors

(Turbine revolution sensor circuit is open or 
shorted)

• TCM

 

 

 

 

 

 

 

Content   ..  566  567  568  569   ..