|
|
Content .. 1223 1224 1225 1226 ..
SRC-48 < COMPONENT DIAGNOSIS > B1035 CRASH ZONE SEN With CONSULT-lll CAUTION: • Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least 3 min- utes. (To discharge backup capacitor.) • Do not use unspecified tester or other measuring device. DIAGNOSTIC PROCEDURE 1. CHECK HARNESS CONNECTOR Check the harness connector. YES >> GO TO 2. NO >> Repair or replace harness connectors. 2. CHECK WIRING HARNESS Check the wiring harness. Is the outside of wiring harness normal, without any damage? YES >> GO TO 3. NO >> Replace wiring harness. 3. CHECK CRASH ZONE SENSOR Is“” displayed on CONSULT-lll? YES or NO YES >> Replace crash zone sensor. NO >> Replace diagnosis sensor unit (ACU). |