|
|
Content .. 1044 1045 1046 1047 ..
PWC-16 < COMPONENT DIAGNOSIS > [FRONT & REAR WINDOW ANTI-PINCH] POWER SUPPLY AND GROUND CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect power window main switch connector. 3. Check continuity between power window main switch connector and ground. Is the inspection result normal? YES >> Check intermittent incident. Refer to GI-39, "Intermittent Incident" . NO >> Repair or replace harness. 4. CHECK BCM OUTPUT SIGNAL 1. Connect BCM connector. 2. Turn ignition switch ON. 3. Check voltage between BCM connector and ground. Is the measurement value within the specification? YES >> Replace power window main switch. Refer to PWC-126, "Removal and Installation" . After that, PWC-16, "POWER WINDOW MAIN SWITCH : Special Repair Requirement" NO >> Replace BCM. Refer to BCS-79, "Removal and Installation" POWER WINDOW MAIN SWITCH : Special Repair Requirement INFOID:0000000000961548 1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. PWC-7, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special . Is the inspection result normal? YES >> GO TO 2. NO >> Check intermittent incident. Refer to GI-39, "Intermittent Incident" . 2. CHECK ANTI-PINCH OPERATION Check anti-pinch operation. PWC-7, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Require- Is the inspection result normal? YES >> Inspection end. NO >> Check intermittent incident. Refer to GI-39, "Intermittent Incident" . FRONT POWER WINDOW SWITCH FRONT POWER WINDOW SWITCH : Description INFOID:0000000000961549 • BCM supplies power. is operated. FRONT POWER WINDOW SWITCH : Component Function Check INFOID:0000000000961550 1. CHECK POWER WINDOW MOTOR FUNCTION Does power window motor operate with front power window switch (passenger side) operation? Is the inspection result normal? Power window main switch connector Terminal Ground Continuity D9 17 Existed Terminals Voltage (V) (Approx.) (+) (–) BCM connector Terminal M118 3 Ground Battery voltage 2 |