Infiniti G20 (P11). Manual - part 476

 

  Index      Infiniti     Infiniti G20 (P11) - service repair manual 1999-2002 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  474  475  476  477   ..

 

 

Infiniti G20 (P11). Manual - part 476

 

 

MAINTENANCE

SECTION

MA

CONTENTS

PRECAUTIONS ...............................................................2

Precautions for Supplemental Restraint System
(SRS)

AIR BAG

and

SEAT BELT

PRE-TENSIONER

......................................................2

PREPARATION ...............................................................3

Special Service Tool ....................................................3
Commercial Service Tool.............................................3

GENERAL MAINTENANCE ............................................4
PERIODIC MAINTENANCE ............................................6

Schedule 1...................................................................7

EMISSION CONTROL SYSTEM MAINTENANCE

.........7

CHASSIS AND BODY MAINTENANCE

........................8

Schedule 2...................................................................9

EMISSION CONTROL SYSTEM MAINTENANCE

.........9

CHASSIS AND BODY MAINTENANCE

......................10

RECOMMENDED FLUIDS AND LUBRICANTS........... 11

Fluids and Lubricants ................................................ 11
SAE Viscosity Number .............................................. 11

GASOLINE ENGINE OIL

.......................................... 11

Anti-freeze Coolant Mixture Ratio .............................12

ENGINE MAINTENANCE ..............................................13

Checking Drive Belts .................................................13
Changing Engine Coolant..........................................14

-DRAINING ENGINE COOLANT-

..............................14

-REFILLING ENGINE COOLANT-

..............................15

-FLUSHING COOLING SYSTEM-

..............................16

Checking Fuel Lines ..................................................16
Changing Fuel Filter ..................................................17

WITH CONSULT-II

..............................................17

WITHOUT CONSULT-II

.......................................17

Changing Air Cleaner Filter .......................................18

VISCOUS PAPER TYPE

...........................................18

Changing Engine Oil..................................................18
Changing Oil Filter.....................................................19
Changing Spark Plugs (Platinum-tipped type) ..........19

Changing Spark Plugs (Conventional type) ..............20
Checking EVAP Vapor Lines .....................................21

CHASSIS AND BODY MAINTENANCE .......................22

Checking Exhaust System.........................................22
Checking Clutch Fluid Level and Leaks....................22
Checking M/T Oil .......................................................22
Changing M/T Oil.......................................................22
Checking A/T Fluid ....................................................23
Changing A/T Fluid ....................................................23
Balancing Wheels ......................................................24
Tire Rotation ..............................................................24
Checking Brake Fluid Level and Leaks.....................24
Checking Brake Lines and Cables ............................24
Checking Disc Brake .................................................25

ROTOR

...................................................................25

CALIPER

.................................................................25

PAD

........................................................................25

Checking Steering Gear and Linkage .......................25

STEERING GEAR

....................................................25

STEERING LINKAGE

...............................................25

Checking Power Steering Fluid and Lines ................25
Axle and Suspension Parts .......................................26
Drive Shaft .................................................................26
Vacuum Hose ............................................................26
Lubricating Locks, Hinges and Hood Latches...........27
Checking Seat Belts, Buckles, Retractors,
Anchors and Adjusters...............................................
27

SERVICE DATA AND SPECIFICATIONS (SDS) .........28

Engine Maintenance ..................................................28

DRIVE BELT DEFLECTION AND TENSION

...............28

SPARK PLUG TYPE

................................................28

Chassis and Body Maintenance................................28

WHEEL BALANCE

...................................................28

GI

EM

LC

EC

FE

CL

MT

AT

AX

SU

BR

ST

RS

BT

HA

SC

EL

IDX

Precautions for Supplemental Restraint System
(SRS) “AIR BAG” and “SEAT BELT
PRE-TENSIONER”

NCMA0011

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER” used along with
a seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of
collision. The SRS system composition which is available to INFINITI G20 is as follows:

I

For a frontal collision
The Supplemental Restraint System consists of driver air bag module (located in the center of the steer-
ing wheel), front passenger air bag module (located on the instrument panel on passenger side), seat belt
pre-tensioners, a diagnosis sensor unit, warning lamp, wiring harness and spiral cable.

I

For a side collision
The Supplemental Restraint System consists of side air bag module (located in the outer side of front seat),
satellite sensor, diagnosis sensor unit (one of components of air bags for a frontal collision), wiring harness,
warning lamp (one of components of air bags for a frontal collision).

Information necessary to service the system safely is included in the RS section of this Service Manual.

WARNING:

I

To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be performed
by an authorized INFINITI dealer.

I

Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the RS section.

I

Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses (except “SEAT BELT PRE-TENSIONER” connector) can be
identified by yellow harness connector.

PRECAUTIONS

Precautions for Supplemental Restraint System (SRS) “AIR BAG” and “SEAT BELT PRE-TENSIONER”

MA-2

Special Service Tool

NCMA0002

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number
(Kent-Moore No.)
Tool name

Description

KV10115801
(J38956)
Oil filter cap wrench

NT375

Removing oil filter
a: 64.3 mm (2.531 in)

Commercial Service Tool

NCMA0010

Tool name
(Kent-Moore No.)

Description

Belt tension gauge
(BT3373-F)

AMA126

Checking drive belt tension

GI

EM

LC

EC

FE

CL

MT

AT

AX

SU

BR

ST

RS

BT

HA

SC

EL

IDX

PREPARATION

Special Service Tool

MA-3

NCMA0003

General maintenance includes those items which should be checked during the normal day-to-day operation
of the vehicle. They are essential if the vehicle is to continue operating properly. The owners can perform
checks and inspections themselves or they can have their INFINITI dealers do them.
OUTSIDE THE VEHICLE

The maintenance items listed here should be performed from time to time, unless otherwise specified.

Item

Reference page

Tires

Check the pressure with a gauge periodically when at a service station,
including the spare, and adjust to the specified pressure if necessary. Check
carefully for damage, cuts or excessive wear.

Wheel nuts

When checking the tires, make sure no nuts are missing, and check for any
loose nuts. Tighten if necessary.

Tire rotation

Tires should be rotated every 12,000 km (7,500 miles).

MA-24

Wheel alignment and
balance

If the vehicle pulls to either side while driving on a straight and level road, or
if you detect uneven or abnormal tire wear, there may be a need for wheel
alignment. If the steering wheel or seat vibrates at normal highway speeds,
wheel balancing may be needed.

MA-24, SU-15, “Front

Wheel Alignment”

Windshield wiper
blades

Check for cracks or wear if they do not wipe properly.

Doors and engine
hood

Check that all doors and the engine hood operate smoothly as well as the
trunk lid and back hatch. Also make sure that all latches lock securely. Lubri-
cate if necessary. Make sure that the secondary latch keeps the hood from
opening when the primary latch is released.
When driving in areas using road salt or other corrosive materials, check
lubrication frequently.

MA-27

INSIDE THE VEHICLE

The maintenance items listed here should be checked on a regular basis, such as when performing periodic maintenance, cleaning the
vehicle, etc.

Item

Reference page

Lamps

Make sure that the headlamps, stop lamps, tail lamps, turn signal lamps, and
other lamps are all operating properly and installed securely. Also check
headlamp aim.

Warning lamps and
buzzers/chimes

Make sure that all warning lamps and buzzers/chimes are operating properly.

Windshield wiper and
washer

Check that the wipers and washer operate properly and that the wipers do
not streak.

Windshield defroster

Check that the air comes out of the defroster outlets properly and in suffi-
cient quantity when operating the heater or air conditioning.

Steering wheel

Check that it has the specified play. Be sure to check for changes in the
steering condition, such as excessive play, hard steering or strange noises.
Free play: Less than 35 mm (1.38 in)

Seats

Check seat position controls such as seat adjusters, seatback recliner, etc. to
make sure they operate smoothly and that all latches lock securely in every
position. Check that the head restrains move up and down smoothly and that
the locks (if equipped) hold securely in all latched positions. Check that the
latches lock securely for folding-down rear seatbacks.

Seat belts

Check that all parts of the seat belt system (e.g. buckles, anchors, adjusters
and retractors) operate properly and smoothly and are installed securely.
Check the belt webbing for cuts, fraying, wear or damage.

MA-27

RS-8, “Seat Belt Inspec-

tion”

Accelerator pedal

Check the pedal for smooth operation and make sure the pedal does not
catch or require uneven effort. Keep the floor mats away from the pedal.

GENERAL MAINTENANCE

MA-4

 

 

 

 

 

 

 

Content   ..  474  475  476  477   ..