|
|
AT-328 < SERVICE INFORMATION > ASSEMBLY 16. Install magnets in oil pan. 17. Install oil pan to transmission case. Install oil pan gasket to transmission case. CAUTION: • Do not reuse oil pan gasket. b. Install oil pan (3) (with oil pan gasket), clips (2) and brackets (1) : Vehicle front • : Bolt (22) CAUTION: • Install it so that drain plug (4) comes to the position as shown in the figure. • Be careful not to pinch harnesses. from oil pan gasket mounting surface. c. Tighten oil pan mounting bolts to the specified torque in numeri- CAUTION: Do not reuse oil pan mounting bolts. 18. Install drain plug to oil pan, and then tighten drain plug mounting bolts to the specified torque. Refer to . CAUTION: Do not reuse drain plug gasket. 19. Install torque converter. a. Pour ATF into torque converter. required for a new torque converter. • When reusing old torque converter, add the same amount of ATF as was drained. SCIA5200E SCIA8128E SCIA4113E SAT428DA |