|
|
ICC BRAKE SWITCH EC-1109 < DTC/CIRCUIT DIAGNOSIS > [VK50VE] C D E F G H I J K L M A EC N P O ICC BRAKE SWITCH Description INFOID:0000000005237615 When the brake pedal is depressed, ICC brake switch is turned OFF and stop lamp switch is turned ON. ECM for the ICC function. Component Function Check INFOID:0000000005237616 1. CHECK ICC BRAKE SWITCH FUNCTION With CONSULT-III 1. Turn ignition switch ON. 2. Select “BRAKE SW1” in “DATA MONITOR” mode with CONSULT-III. 3. Check “BRAKE SW1” indication under the following conditions. Without CONSULT-III 1. Turn ignition switch ON. 2. Check the voltage between ECM harness connector terminals as per the following. Is the inspection result normal? YES >> INSPECTION END NO >> Go to EC-1109, "Diagnosis Procedure" . Diagnosis Procedure INFOID:0000000005237617 1. CHECK DTC WITH ICC SENSOR INTEGRATED UNIT CCS-44, "Diagnosis Description" Are any DTCs detected? YES >> Perform the Diagnosis Procedure corresponding to the detected DTC. NO >> GO TO 2. 2. CHECK OVERALL FUNCTION With CONSULT-III 1. Turn ignition switch ON. 2. Select “BRAKE SW1” in “DATA MONITOR” mode with CONSULT-III. 3. Check “BRAKE SW1” indication under the following conditions. Without CONSULT-III 1. Turn ignition switch ON. 2. Check the voltage between ECM harness connector terminals under the following conditions. Monitor item Condition Indication BRAKE SW1 Brake pedal Slightly depressed OFF Fully released ON ECM Condition Voltage Connector + – Terminal Terminal M160 117 (ICC brake switch signal) 128 Brake pedal Slightly depressed Approx. 0 V Fully released Battery voltage Monitor item Condition Indication BRAKE SW1 Brake pedal Slightly depressed OFF Fully released ON |