|
|
ADP-128 < ECU DIAGNOSIS INFORMATION > DRIVER SEAT CONTROL UNIT 19 (V) — CAN-L — — — 21 (L/Y) Ground Detention switch Input A/T selector lever P position 0 Except P po- sition 24 (R) Ground Sliding sensor signal Input Seat sliding Operate Stop 0 or 5 25 (Y/B) Ground Lifting sensor (front) sig- Input Seat lifting (front) Operate Stop 0 or 5 26 (Y) Ground Sliding switch forward Input Sliding switch Operate (forward) 0 Release Battery voltage 27 (R/G) Ground Reclining switch forward Input Reclining switch Operate (forward) 0 Release Battery voltage 28 (W/B) Ground Lifting switch (front) up Input Seat lifting switch Operate (up) 0 Release Battery voltage 29 (P/L) Ground Lifting switch (rear) up Input Seat lifting switch Operate (up) 0 Release Battery voltage 31 (GR) Ground Sensor ground — — 0 32 (B/W) Ground Ground (signal) — — 0 33 (R) Ground Power source (C/B) Input — Battery voltage 35 (W/R) Ground Sliding motor forward Output Seat sliding Operate (forward) Battery voltage Release 0 Terminal No. (Wire color) Description Condition Voltage (V) (Approx) + - Signal name Input/ Output JMJIA0120ZZ JMJIA0119ZZ JMJIA0119ZZ |