|
|
DEF-8 < FUNCTION DIAGNOSIS > DIAGNOSIS SYSTEM (BCM) • Vehicle Condition (BCM detected condition) IGN Counter IGN counter indicates the number of times that ignition switch is turned ON after DTC is detected. → 2 → 3...38 → 39 after returning to the normal condition whenever ignition switch OFF → ON. • The number is fixed to 39 until the self-diagnosis results are erased if it is over 39. REAR WINDOW DEFOGGER REAR WINDOW DEFOGGER : CONSULT-III Function (BCM - REAR DEFOGGER) INFOID:0000000003136646 Data monitor ACTIVE TEST CONSULT screen terms Description SLEEP>LOCK While turning BCM status from low power consumption mode to normal mode (Power supply SLEEP>OFF While turning BCM status from low power consumption mode to normal mode (Power supply LOCK>ACC While turning power supply position from “LOCK” to “ACC” ACC>ON While turning power supply position from “ACC” to “IGN” RUN>ACC While turning power supply position from “RUN” to “ACC” (Vehicle is stopping and selector CRANK>RUN While turning power supply position from “CRANKING” to “RUN” (From cranking up the en- RUN>URGENT While turning power supply position from “RUN“ to “ACC” (Emergency stop operation) ACC>OFF While turning power supply position from “ACC” to “OFF” OFF>LOCK While turning power supply position from “OFF” to “LOCK” OFF>ACC While turning power supply position from “OFF” to “ACC” ON>CRANK While turning power supply position from “IGN” to “CRANKING” OFF>SLEEP While turning BCM status from normal mode (Power supply position is “OFF”.) to low power LOCK>SLEEP While turning BCM status from normal mode (Power supply position is “LOCK”.) to low pow- LOCK Power supply position is “LOCK” (Ignition switch OFF with steering is locked.) OFF Power supply position is “OFF” (Ignition switch OFF with steering is unlocked.) ACC Power supply position is “ACC” (Ignition switch ACC) ON Power supply position is “IGN” (Ignition switch ON with engine stopped) ENGINE RUN Power supply position is “RUN” (Ignition switch ON with engine running) CRANKING Power supply position is “CRANKING” (At engine cranking) Monitor Item Description REAR DEF SW This is displayed even when it is not equipped. PUSH SW Indicates [ON/OFF] condition of push switch. Test Item Description REAR DEFOGGER This test is able to check rear window defogger operation. Rear window defogger operates when |