Infiniti EX35. Manual - part 373

 

  Index      Infiniti     Infiniti EX35 - service repair manual 2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  371  372  373  374   ..

 

 

Infiniti EX35. Manual - part 373

 

 

CCS

DIAGNOSIS SYSTEM (ICC SENSOR INTEGRATED UNIT)

CCS-27

< FUNCTION DIAGNOSIS >

[INTELLIGENT CRUISE CONTROL]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

ACTIVE TEST

CAUTION:

• Never perform the active test while driving.
• “ACTIVE TEST” cannot be started while ICC system warning lamp illuminates.

ICC BUZZER

METER LAMP

CAUTION:

Start engine and perform active test.

STOP LAMP

ECU IDENTIFICATION

Displays the part number of the ICC sensor integrated unit. 

PWR SUP MONI
[V]

×

Indicates IGN voltage input by ICC sensor integrated unit.

VHCL SPD AT
[km/h] or [mph]

Indicates vehicle speed calculated from A/T vehicle speed sensor read from ICC sensor inte-
grated unit through CAN communication (TCM transmits A/T vehicle speed sensor signal 
through CAN communication).

THRTL OPENING
[%]

×

Indicates throttle position read from ICC sensor integrated unit through CAN communication 
(ECM transmits accelerator pedal position signal through CAN communication).

GEAR
[1, 2, 3, 4, 5]

Indicates A/T gear position read from ICC sensor integrated unit through CAN communication 
(TCM transmits current gear position signal through CAN communication).

CLUTCH SW SIG
[Off]

×

NOTE:
This item is displayed, but cannot monitor.

NP SW SIG
[On/Off]

×

Indicates [On/Off] status as judged from park/neutral position switch signal (ECM transmits 
park/neutral position switch signal through CAN communication).

MODE SIG
[OFF, ICC, ASCD]

Indicates the active mode from ICC or ASCD [conventional (fixed speed) cruise control mode]. 

SET DISP IND
[On/Off]

Indicates [On/Off] status of SET switch indicator output.

DISTANCE
[m]

Indicates the distance from the vehicle ahead.

RELATIVE SPD
[m/s]

Indicates the relative speed of the vehicle ahead. 

Monitored Item [unit]

MAIN 

SIGNALS

Description

Test item

Operation

Description

Buzzer sound

ICC BUZZER

Test Start

Operates ICC warning chime

Beep

Reset

Stops ICC warning chime

Not activated

End

Return to a “SELECT TEST ITEM” screen

Test item

Operation

Description

MAIN switch indicator lamp and 

ICC system warning lamp

METER LAMP

Off

MAIN switch indicator lamp and ICC 
warning lamp are turned off

Turn OFF

On

MAIN switch indicator lamp and ICC 
warning lamp are turned on

Turn ON

Test item

Operation

Description

Stop lamp

STOP LAMP

Off

Stops the ICC brake hold relay

OFF

On

Drives the ICC brake hold relay

ON

CCS-28

< COMPONENT DIAGNOSIS >

[INTELLIGENT CRUISE CONTROL]

C1A00 CONTROL UNIT

COMPONENT DIAGNOSIS

C1A00 CONTROL UNIT

Description

INFOID:0000000003130034

ICC sensor integrated unit function description.
• Irradiates laser beam, and receives reflected laser beam to measure distance from preceding vehicle.
• Controls vehicle distance by operating electric throttle control actuator based on that sensor signals and

CAN communication. 

• Controls vehicle distance by transmitting deceleration degree commandment value signal to ABS actuator

and electric unit (control unit) when deceleration with brake is needed.

DTC Logic

INFOID:0000000003130035

DTC DETECTION LOGIC

Diagnosis Procedure

INFOID:0000000003130036

1.

PERFORM SELF-DIAGNOSIS OF ICC SENSOR INTEGRATED UNIT

1.

Perform self-diagnosis of ICC sensor integrated unit.

2.

Check if DTC other than “C1A00: CONTROL UNIT” (DTC 0) is detected.

Is any DTC detected?

YES

>> GO TO 2.

NO

>> GO TO 3.

2.

DIAGNOSIS FOR DETECTED DTC

Perform diagnosis on the detected DTC and repair or replace the applicable item. Refer to 

CCS-85, "DTC

Index"

.

>> GO TO 4.

3.

REPLACE ICC SENSOR INTEGRATED UNIT

1.

Replace ICC sensor integrated unit.

2.

Adjust laser beam aiming. Refer to 

CCS-8, "LASER BEAM AIMING ADJUSTMENT : Special Repair

Requirement (Preparation)"

.

>> GO TO 4.

4.

CHECK ICC SYSTEM

1.

Erase DTC and perform ICC system action test. Then perform self-diagnosis of ICC sensor integrated
unit. (For the details on the ICC system action test, refer to 

CCS-13, "ACTION TEST : Special Repair

Requirement (Vehicle-To-Vehicle Distance Control Mode)"

).

2.

Check that no abnormal condition is present in the ICC system. 

>> INSPECTION END

DTC No.

(On board 

display)

Trouble diagnosis 

name

DTC detecting condition

Possible cause

C1A00

(0)

CONTROL UNIT

ICC sensor integrated unit internal malfunction.

ICC sensor integrated unit

CCS

C1A01 POWER SUPPLY CIRCUIT 1, C1A02 POWER SUPPLY CIRCUIT 2

CCS-29

< COMPONENT DIAGNOSIS >

[INTELLIGENT CRUISE CONTROL]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

C1A01 POWER SUPPLY CIRCUIT 1, C1A02 POWER SUPPLY CIRCUIT 2

Description

INFOID:0000000003130037

The ICC sensor integrated unit controls the ICC system through the ignition power supply.

DTC Logic

INFOID:0000000003130038

DTC DETECTION LOGIC

Diagnosis Procedure

INFOID:0000000003130039

1.

CHECK CONNECTOR OF ICC SENSOR INTEGRATED UNIT

1.

Turn ignition switch OFF.

2.

Disconnect ICC sensor integrated unit connector, and connect it securely again.

3.

Start engine and erase DTC.

4.

Press MAIN switch (ICC system ON).

5.

Perform self-diagnosis of ICC sensor integrated unit.

6.

Check if DTC “C1A01: POWER SUPPLY CIR” (DTC 1) or “C1A02: POWER SUPPLY CIR 2” (DTC 2) is
detected.

Is any DTC detected?

YES

>> GO TO 3.

NO

>> GO TO 2.

2.

CHECK ICC SENSOR INTEGRATED UNIT CONNECTOR

1.

Check ICC sensor integrated unit connector housing for disconnected, loose, bent, and collapsed termi-
nals.

2.

Repair or replace the applicable item if any abnormal condition is found.

>> GO TO 6.

3.

CHECK POWER SUPPLY AND GROUND CIRCUIT OF ICC SENSOR INTEGRATED UNIT

Check power supply and ground circuit of ICC sensor integrated unit. Refer to 

CCS-77, "Diagnosis Proce-

dure"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> GO TO 4.

4.

REPAIR OR REPLACE ICC SENSOR INTEGRATED UNIT POWER SUPPLY AND GROUND CIRCUIT

Repair and replace the malfunctioning ICC sensor integrated unit power supply and ground circuit. 

>> GO TO 6.

5.

REPLACE ICC SENSOR INTEGRATED UNIT

1.

Replace ICC sensor integrated unit.

2.

Adjust laser beam aiming. Refer to 

CCS-8, "LASER BEAM AIMING ADJUSTMENT : Special Repair

Requirement (Preparation)"

.

>> GO TO 6.

DTC No.

(On board 

display)

Trouble diagnosis name

DTC detecting condition

Possible cause

C1A01

(1)

POWER SUPPLY CIR

ICC sensor integrated unit power supply voltage 
is excessively low (Less than 8 V).

• ICC sensor integrated unit
• Connector, harness, fuse

C1A02

(2)

POWER SUPPLY CIR 2

ICC sensor integrated unit power supply voltage 
is excessively high (More than 19 V).

CCS-30

< COMPONENT DIAGNOSIS >

[INTELLIGENT CRUISE CONTROL]

C1A01 POWER SUPPLY CIRCUIT 1, C1A02 POWER SUPPLY CIRCUIT 2

6.

CHECK ICC SYSTEM

1.

Erase DTC and perform ICC system action test. Then perform self-diagnosis of ICC sensor integrated
unit. (For the details on the ICC system action test, refer to 

CCS-13, "ACTION TEST : Special Repair

Requirement (Vehicle-To-Vehicle Distance Control Mode)"

).

2.

Check that no abnormal condition is present in the ICC system. 

>> INSPECTION END

 

 

 

 

 

 

 

Content   ..  371  372  373  374   ..