|
|
AV MODE CHANGE SIGNAL CIRCUIT AV-241 < COMPONENT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION] C D E F G H I J K L M B A O P MODE CHANGE SIGNAL CIRCUIT Description INFOID:0000000003508714 • AV control unit transmits the mode change signal to BOSE amp. be the center of sounds. Diagnosis Procedure INFOID:0000000003508715 1. CHECK CONTINUITY MODE CHANGE SIGNAL CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect BOSE amp. connector and AV control unit connector. 3. Check continuity between BOSE amp. harness connector and AV control unit harness connector. 4. Check continuity between BOSE amp. harness connector and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector. 2. CHECK MODE CHANGE SIGNAL 1. Connect BOSE amp. connector. 2. Turn ignition switch ON. 3. Check signal between BOSE amp. harness connector and ground. Is the inspection result normal? YES >> Replace AV control unit. NO >> Replace BOSE amp. BOSE amp. AV control unit Continuity Connector Terminal Connector Terminal B41 17 M82 27 Existed BOSE amp. Ground Continuity Connector Terminal B41 17 Not existed (+) ( − ) Reference value (Approx.) BOSE amp. Connector Terminal B41 17 Ground 8.5 V |