|
|
ADP-110 < COMPONENT DIAGNOSIS > RECLINING MOTOR RECLINING MOTOR Description INFOID:0000000003134752 • The seat reclining motor is installed to the seat back frame. Component Function Check INFOID:0000000003134753 1. CHECK FUNCTION 1. Turn ignition switch ON. 2. Select “SEAT RECLINING” in “Active test” mode with CONSULT-III. 3. Check the reclining motor operation. Is the operation of relevant parts normal? YES >> INSPECTION END NO >> Perform diagnosis procedure. Refer to ADP-110, "Diagnosis Procedure" . Diagnosis Procedure INFOID:0000000003134754 1. CHECK RECLINING MOTOR POWER SUPPLY 1. Turn ignition switch OFF. 2. Disconnect reclining motor connector. 3. Turn the ignition switch ON. 4. Perform “Active test” (“SEAT RECLINING”) with CONSULT-III 5. Check voltage between reclining motor harness connector and ground. Is the inspection result normal? YES >> Replace reclining motor. (Built in seat back frame.) NO >> GO TO 2. 2. CHECK RECLINING MOTOR CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect driver seat control unit connector. 3. Check continuity between driver seat control unit harness connector and reclining motor harness connec- Test item Description SEAT RECLINING OFF Seat reclining Stop FR Forward RR Backward (+) (-) Condition Voltage (V) (Approx.) Reclining motor Connector Terminal B454 36 Ground SEAT RECLINING OFF 0 FR (forward) Battery voltage RR (backward) 0 44 OFF 0 FR (forward) 0 RR (backward) Battery voltage |