Index Infiniti Infiniti EX35 - service repair manual 2008 year
|
|
ADP-6 < BASIC INSPECTION > DIAGNOSIS AND REPAIR WORKFLOW 1. GET INFORMATION FOR SYMPTOM Get the detailed information from the customer about the symptom (the condition and the environment when >> GO TO 2. 2. CHECK DTC WITH AUTOMATIC DRIVE POSITIONER SYSTEM Check “Self Diagnostic Result” with CONSULT-III. Refer to Is any symptom described and any DTC is displayed? Symptom is described, DTC is displayed.>>GO TO 3. 3. CONFIRM THE SYMPTOM Try to confirm the symptom described by the customer. >> GO TO 6. 4. CONFIRM THE SYMPTOM Try to confirm the symptom described by the customer. >> GO TO 5. 5. CHECK NORMAL OPERATING CONDITION Check normal operating condition. Refer to . Is the incident normal operation? YES >> INSPECTION END NO >> GO TO 7. 6. PERFORM DTC CONFIRMATION PROCEDURE Perform the confirmation procedure for the detected DTC. Is the DTC displayed? YES >> GO TO 8. NO >> Check intermittent incident. Refer to GI-38, "Intermittent Incident" . 7. PERFORM COMPONENT FUNCTION CHECK Perform the component function check for the isolated malfunctioning point. >> GO TO 8. 8. DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE Isolate the malfunctioning point by performing the diagnosis procedure relevant to the symptom during the >> GO TO 9. 9. REPAIR OR REPLACE Repair or replace the malfunctioning part. >> GO TO 10. 10. FINAL CHECK Perform the DTC confirmation procedure (if DTC is detected) or component function check (if no DTC is Are all malfunctions corrected? |