Content   ..  15  16  17  18   ..

Hyundai Genesis (2016 year). Instruction - part 17

Emergency braking

✽ NOTICE

AUTO HOLD (if equipped)

If there is a problem with the brake

During emergency braking the

This feature keeps the brake applied

pedal while driving, emergency brak-

Parking Brake Warning Light will

when the shift lever is in D (Drive), R

ing is possible by pulling up and

illuminate to indicate that the sys-

(Reverse), N

(Neutral) or Sports

holding the EPB switch. Braking is

tem is operating.

Mode with the feature enabled and

possible only while you are holding

when the brake pedal has been

the EPB switch. However, braking

depressed to stop the vehicle.

CAUTION

distance will be longer than normal.

If there is a noise or burning

To apply:

WARNING

smell after using the emergency

brake, have your vehicle checked

White

Do not operate the parking

by an authorized HYUNDAI deal-

brake while the vehicle is mov-

er as soon as possible.

ing except in an emergency sit-

5

uation. It could damage the

brake system and lead to a

severe accident.

ODH053018

1. Press the [AUTO HOLD] switch.

The AUTO HOLD indicator will illu-

minate white and the system will

be in the standby position.

5-31

Driving your vehicle

To release:

To cancel:

White

•

Press the accelerator pedal with

the shift lever in R

(Reverse), D

Light off

(Drive) or Sports Mode, the Auto

Hold will be released automatically

and the vehicle will start to move.

The indicator changes from green

Green

to white.

•

If the vehicle is restarted using the

advanced smart cruise control

lever (RES+ or SET-) while Auto

ODH053019

Hold and advanced smart cruise

2. When you stop the vehicle com-

control is operating

(The green

ODH053020

pletely by depressing the brake

AUTO HOLD indicator), the Auto

pedal, the Auto Hold maintains the

Hold will be released regardless of

1. Depress the brake pedal.

brake pressure to hold the vehicle

accelerator pedal operation.

2. Press the [AUTO HOLD] switch.

stationary. The indicator changes

The AUTO HOLD indicator will

from white to green.

turn off.

3. The vehicle will remain stationary

even if you release the brake

pedal.

4. If EPB is applied, Auto Hold will be

released.

5-32

Driving your vehicle

Warning messages

ODH053051L

ODH053053L

AUTO HOLD deactivating.

Press brake pedal to deactivate

ODH053046L

Press brake pedal

AUTO HOLD

Parking brake automatically locked

When the conversion from Auto Hold

If you did not apply the brake pedal

When the EPB is applied from Auto

to EPB is not working properly a

when you release the Auto Hold by

Hold, a warning will sound and a

warning will sound and a message

pressing the [AUTO HOLD] switch, a

message will appear.

will appear.

warning will sound and a message

will appear.

CAUTION

Depress the brake pedal when

the above message appears for

the Auto Hold and EPB may not

activate.

5-34

Anti-lock Brake System (ABS)

(Continued)

• Drive your vehicle at reduced

WARNING

speeds during the following

conditions:

An Anti-Lock Braking System

(ABS) or an Electronic Stability

• Rough, gravel or snow-cov-

ered roads.

Control (ESC) system will not

prevent accidents due to

• On roads where the road sur-

improper or dangerous driving

face is pitted or has different

maneuvers. Even though vehi-

surface height.

cle control is improved during

• Tire chains are installed on

ODH053055L

emergency braking, always

your vehicle.

maintain a safe distance

AUTO HOLD conditions not met.

The safety features of an ABS

between you and objects ahead

Close door, hood, trunk, and fasten

or ESC equipped vehicle should

5

of you. Vehicle speeds should

seatbelt

not be tested by high speed

always be reduced during

When you press the [AUTO HOLD]

driving or cornering. This could

extreme road conditions. The

switch, if the driver's door, engine

endanger the safety of yourself

braking distance for cars

hood and trunk are not closed or the

or others.

equipped with ABS or ESC may

driver's seat belt is not fastened, a

be longer than for those without

warning will sound and a message

these systems in the following

will appear on the LCD display. In

road conditions.

that time, press the [AUTO HOLD]

(Continued)

button after closing the driver's door,

engine hood and trunk and fastening

the seat belt.

5-35

✽ NOTICE

WARNING

CAUTION

When you jump start your vehicle

because of a drained battery, the

If the ABS warning light (

) is

When you drive on a road hav-

ABS warning light (

) may turn

on and stays on, you may have

ing poor traction, such as an icy

on at the same time. This happens

a problem with the ABS. Your

road, and apply your brakes

because of the low battery voltage. It

power brakes will work normal-

continuously, the ABS will be

does not mean your ABS is malfunc-

ly. To reduce the risk of serious

active continuously and the

tioning. Have the battery recharged

injury or death, contact your

ABS warning light (

) may

before driving the vehicle.

HYUNDAI dealer as soon as

illuminate. Pull your car over to

possible.

a safe place and turn the engine

off.

Restart the engine. If the ABS

warning light is off, then your

ABS system is normal.

5

Otherwise, you may have a

problem with your ABS system.

Contact an authorized HYUNDAI

dealer as soon as possible.

5-37

Driving your vehicle

Electronic Stability Control

When operating

WARNING

(ESC)

When the ESC is in opera-

tion, the ESC indicator light

Never drive too fast for the road

blinks:

conditions or too quickly when

cornering. The ESC system will

• When you apply your brakes under

not prevent accidents.

conditions which may lock the

wheels, you may hear sounds from

Excessive speed in turns, abrupt

the brakes, or feel a corresponding

maneuvers, and hydroplaning

sensation in the brake pedal. This

on wet surfaces can result in

is normal and it means your ESC is

severe accidents.

active.

• When the ESC activates, the

ESC operation

engine may not respond to the

ODH054163N

ESC ON condition

accelerator as it does under rou-

tine conditions.

The Electronic Stability Control

When the Engine Start/Stop button

• If the Cruise Control was in use

(ESC) system helps to stabilize the

is in the ON position, the ESC and

when the ESC activates, the

vehicle during cornering maneuvers.

the ESC OFF indicator lights illumi-

Cruise Control automatically disen-

ESC checks where you are steering

nate for approximately three seconds

gages. The Cruise Control can be

and where the vehicle is actually

and goes off, then the ESC is turned

reengaged when the road condi-

going. ESC applies braking pressure

on.

tions allow. See

“Cruise Control

to any one of the vehicle’s brakes

System” later in this chapter.

(if

and intervenes in the engine man-

equipped)

agement system to assist the driver

with keeping the vehicle on the

intended path. It is not a substitute

for safe driving practices. Always

adjust your speed and driving to the

road conditions.

5-38

• When moving out of the mud or

• State 2

Indicator lights

driving on a slippery road, the

Press the ESC OFF button for more

engine rpm

(revolutions per

■ ESC indicator light (blinks)

than 3 seconds. ESC OFF indicator

minute) may not increase even if

light illuminates and ESC OFF warn-

you press the accelerator pedal

ing chime will sound. At this state,

deeply. This is to maintain the sta-

the engine control function and brake

bility and traction of the vehicle and

control function does not operate. In

does not indicate a problem.

other words, the vehicle stability con-

■ ESC OFF indicator light (comes on)

trol function does not operate any

more.

ESC OFF condition

If the Engine Start/Stop button is

To cancel ESC operation :

pressed to the OFF position when

When the Engine Start/Stop button

ESC is off, ESC remains off. Upon

5

is pressed to the ON position, the

• State 1

restarting the engine, the ESC will

ESC indicator light illuminates, then

Press the ESC OFF button shortly

automatically turn on again.

goes off if the ESC system is operat-

(ESC OFF indicator light illumi-

ing normally.

nates). At this state, the engine con-

The ESC indicator light blinks when-

trol function does not operate. In

ever the ESC is operating.

other words, the traction control

function does not operate but only

If ESC indicator light stays on, your

the brake control function operates.

vehicle may have a malfunction with

the ESC system. When this warning

light illuminates have your vehicle

checked by an authorized HYUNDAI

dealer as soon as possible.

5-39

Driving your vehicle

The ESC OFF indicator light comes

ESC OFF usage

CAUTION

on when the ESC is turned off from

When Driving

the User Settings Mode.

The ESC OFF mode should only be

To prevent damage to the trans-

used briefly to help free the vehicle if

mission:

WARNING

stuck in snow or mud by temporarily

•

Do not allow wheel(s) of one

stopping operation of the ESC to

axle to spin excessively while

When the ESC is blinking, this

maintain wheel torque.

the ESC, ABS, and brake

indicates the ESC is active:

To turn ESC off while driving, press

warning lights are displayed.

Drive slowly and NEVER

the ESC OFF button while driving on

The repairs would not be cov-

attempt to accelerate. NEVER

a flat road surface.

ered by the vehicle warranty.

turn the ESC off while the ESC

Reduce engine power and do

indicator light is blinking or you

not spin the wheel(s) exces-

may lose control of the vehicle

sively while these lights are

resulting in an accident.

displayed.

•

When operating the vehicle

on a dynamometer, ensure the

CAUTION

ESC is turned off (ESC OFF

light illuminated).

Driving with varying tire or

wheel sizes may cause the ESC

system to malfunction. When

✽ NOTICE

replacing tires, make sure they

Turning the ESC off does not affect

are the same size as your origi-

ABS or standard brake system oper-

nal tires for this vehicle.

ation.

5-40

Hill-Start Assist Control (HAC)

Good braking practices

To dry the brakes, apply the brakes

lightly until the braking action returns

The Hill-Start Assist Control (HAC)

to normal, taking care to keep the

prevents the vehicle from rolling

WARNING

vehicle under control at all times. If

backwards when starting a vehicle

the braking action does not return to

from a stop on a hill. The system

Whenever leaving the vehicle or

normal, stop as soon as it is safe to

operates the brakes automatically for

parking, always come to a com-

do so and call an authorized

approximately 2 seconds and releas-

plete stop and continue to

HYUNDAI dealer for assistance.

es the brake when the accelerator

depress the brake pedal. Move

pedal is depressed or after 2 sec-

the shift lever into the P (Park)

DO NOT drive with your foot resting

onds.

position, then apply the parking

on the brake pedal. Even light, but

brake, and place the Engine

constant pedal pressure can result in

Start/Stop button in the OFF

the brakes overheating, brake wear,

WARNING

position.

and possibly even brake failure.

Vehicles with the parking brake

If a tire goes flat while you are driv-

Always be ready to depress the

5

not fully engaged are at risk for

ing, apply the brakes gently and

accelerator pedal when starting

moving inadvertently and caus-

keep the vehicle pointed straight

off on a incline. The HAC acti-

ing injury to yourself or others.

ahead while you slow down. When

vates only for approximately 2

you are moving slowly enough for it

seconds.

to be safe to do so, pull off the road

Wet brakes can be dangerous! The

and stop in a safe location.

brakes may get wet if the vehicle is

Keep your foot firmly on the brake

✽ NOTICE

driven through standing water or if it

pedal when the vehicle is stopped to

• The HAC does not operate when

is washed. Your vehicle will not stop

prevent the vehicle from rolling for-

the shift lever is in P (Park) or N

as quickly if the brakes are wet. Wet

ward.

(Neutral)

brakes may cause the vehicle to pull

• The HAC activates even though

to one side.

the ESC

(Electronic Stability

Control) is off but does not acti-

vate when the ESC has malfunc-

tioned.

5-41

Driving your vehicle

DRIVE MODE INTEGRATED CONTROL SYSTEM

•

The mode changes whenever the

ECO mode (Active ECO)

DRIVE MODE switch is pressed.

Active ECO helps improve

NORMAL

ECO

fuel efficiency by control-

ling certain engine and

transmission

system

SPORT

ECO

operating parameters.

Fuel efficiency depends on the dri-

When NORMAL mode is selected,

ver's driving habit and road condi-

it is not displayed on the instrument

tion.

cluster.

• When the DRIVE MODE switch is

•

When the DRIVE MODE switch is

pressed and the ECO mode is

ODH053021

pressed for more than one second,

selected, the ECO indicator

The drive mode may be selected

the SNOW mode will operate

(green) will illuminate to show that

according to the driver’s preference

regardless of whichever DRIVE

the Active ECO is operating.

or road condition.

mode (NORMAL/ECO/SPORT) is

• When the Active ECO is activated,

operating. If the switch is pressed

The system initializes to the NOR-

and the engine is turned off and on

once more, the DRIVE mode

MAL mode after the engine has been

it will change to NORMAL mode. To

(NORMAL/ECO/SPORT) that was

turned off and on.

turn on the ECO mode, press the

operating previously will operate.

DRIVE MODE switch till it is select-

•

The selected mode is displayed on

✽ NOTICE

ed.

the AVN monitor.

If there is a problem with the

Electronic Stability Control (ESC)

system, the drive mode will be in

NORMAL mode and may not

change to ECO mode, SPORT mode

or SNOW mode.

5-42

Driving your vehicle

ELECTRONIC CONTROL SUSPENSION (ECS) (IF EQUIPPED)

SNOW mode (if equipped)

The Electronic Control Suspension

ECS (Electronic Control

(ECS) controls the vehicle suspen-

Suspension) malfunction indi-

SNOW mode helps the

sion automatically to maximize driv-

cator

SNOW

driver to drive more effec-

ing comfort by taking into account

tively on slippery roads

the driving conditions such as speed,

such as snowy or muddy

surface of the road, cornering, stop-

roads.

ping requirements and acceleration.

•

When the DRIVE MODE switch is

pressed for more than one second,

the SNOW mode will operate

regardless of whichever drive

mode (NORMAL/ECO/SPORT) is

operating. If the switch is pressed

once more, the drive mode (NOR-

MAL/ECO/SPORT) that was oper-

ating previously will operate.

ODH053072L

If the ECS warning message comes

on, you may have a problem with the

ECS system. Have your vehicle

checked by an authorized HYUNDAI

dealer.

5-44

AUTONOMOUS EMERGENCY BRAKING (AEB) (IF EQUIPPED)

The Autonomous Emergency

WARNING

(Continued)

Braking (AEB) helps avoid accidents

by identifying critical situations early

•

AEB operates according to

Take the following precautions

the distance from the vehicle

and warning the driver.

when using the Autonomous

ahead, relative velocity, and

Emergency Braking (AEB):

driver's operation of the brake

or accelerator pedal. Do not

•

This system is only a supple-

drive dangerously to inten-

mental system and it is not

tionally operate the AEB.

intended to, nor does it

replace the need for extreme

•

ALWAYS check the speed and

care and attention of the driv-

the distance to the vehicle

er. The sensing range and

ahead. The AEB is not a sub-

objects detectable by the sen-

stitute for safe driving prac-

sors are limited. Pay attention

tices.

to the road conditions at all

5

times.

•

NEVER drive too fast for the

road conditions or too quickly

when cornering.

•

Always drive cautiously to

prevent unexpected and sud-

den situations from occur-

ring. AEB does not stop the

vehicle completely and does

not avoid collisions.

(Continued)

5-45

Driving your vehicle

AEB Operation

A warning message and chime will

Brake operation

sound when you need to use the

Warning message

In a critical situation:

brake pedal or steering wheel due to

•

The brake assist system enters

a sudden stop or lack of distance

standby mode to react promptly

with the vehicle ahead. The warning

when the driver operates the brake

messages will vary according to the

pedal.

severity of the situation. Immediately

reduce your speed to prevent a colli-

•

The vehicle automatically reduces

sion.

speed according to the severity of

the situation.

- Rapidly reduces speed when vehi-

ODH053060L

cle speed is under 50 mph (80

km/h)

- Slowly reduces speed when vehi-

cle speed is over 50 mph (80 km/h)

•

If the driver uses the brake pedal to

reduce vehicle speed, the brake

assist system operates to increase

braking efficiency.

ODH053064L

•

If the driver presses down hard on

the accelerator pedal or sharply

turns the steering wheel, the brake

assist system is canceled.

Seat belt operation

The driver's and passenger's seat

belt may tighten if the system detects

ODH053066L

that a vehicle or object is close.

5-46

Automatic emergency mode

To cancel the AEB

WARNING

change

In a critical situation, to help avoid

The Automatic Emergency

collisions, the Automatic Emergency

Mode is a supplemental system

Mode automatically controls the

to assist you and its effects may

Electronic Control Suspension

differ according to road and

(ECS) and Electronic Stability

driving conditions. The vehicle

Control (ESC). When the critical situ-

cannot automatically avoid a

ation is over, the Electronic Control

collision. Do not solely rely on

Suspension

(ECS) and Electronic

the system and always pay

Stability Control (ESC) returns to its

attention to prevent dangerous

previous status.

situations from occurring.

ODH054204C

✽ NOTICE

5

•

Go to the User Settings Mode

• If the AEB is canceled from the

(Driving Assist) and undo the check

User Settings Mode or there is a

for AEB (Autonomous Emergency

problem with the AEB system, the

Braking) on the LCD display (For

Automatic Emergency Mode will

more details refer to "LCD

not work.

Display" in chapter 3.). The warn-

• If the ESC is off or there is a prob-

ing operation and automatic braking

lem with the ESC system, the

operation will not function.

Automatic Emergency Mode will

•

To turn on the AEB, select AEB

not work.

(Autonomous Emergency Braking)

• The ESC must be on for the

from the User Settings Mode

Automatic Emergency Mode to

(Driving Assist) on the LCD display.

control ESC in collision situations.

The warning operation and automat-

ic braking operation will function.

5-47

Content   ..  15  16  17  18   ..