Hyundai Genesis (2016 year). Instruction - part 11

 

  Index      Hyundai     Hyundai Genesis - instruction 2016 year in english

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  9  10  11  12   ..

 

 

Hyundai Genesis (2016 year). Instruction - part 11

 

 

Convenient features of your vehicle
Parking Brake & Brake
If the brake fluid level in the reser-
Dual-diagonal braking system
Fluid Warning Light
voir is low:
Your vehicle is equipped with dual-
1. Drive carefully to the nearest safe
diagonal braking systems. This
location and stop your vehicle.
means you still have braking on two
This warning light illuminates:
wheels even if one of the dual sys-
2. With the engine stopped, check the
• Once you set the Engine Start/Stop
tems should fail.
brake fluid level immediately and
button to the ON position.
add fluid as required
(For more
With only one of the dual systems
- It illuminates for approximately 3
details, refer to "Brake Fluid" in
working, more than normal pedal
seconds.
chapter 7). Then check all brake
travel and greater pedal pressure are
- It remains on if the parking brake
components for fluid leaks. If any
required to stop the vehicle.
is applied.
leak on the brake system is still
Also, the vehicle will not stop in as
• When the parking brake is applied.
found, the warning light remains on,
short a distance with only a portion
or the brakes do not operate prop-
• When the brake fluid level in the
of the brake system working.
erly, do not drive the vehicle. In this
reservoir is low.
If the brakes fail while you are driv-
case, have your vehicle inspected
- If the warning light illuminates
ing, shift to a lower gear for addition-
by an authorized HYUNDAI dealer.
with the parking brake released, it
al engine braking and stop the vehi-
indicates the brake fluid level in
cle as soon as it is safe to do so.
reservoir is low.
3-96
Anti-lock Brake System
Electronic Brake force
WARNING
(ABS) Warning Light
Distribution (EBD)
System Warning Light
Parking Brake & Brake Fluid
Warning Light
This warning light illuminates:
• Once you set the Engine Start/Stop
Driving the vehicle with a warn-
button to the ON position.
ing light ON is dangerous. If the
Parking Brake & Brake Fluid
- It illuminates for approximately 3
These two warning lights illuminate
3
Warning Light illuminates with
seconds and then goes off.
at the same time while driving:
the parking brake released, it
• When there is a malfunction with
• When the ABS and regular brake
indicates that the brake fluid
the ABS (The normal braking sys-
system may not work normally.
level is low.
tem will still be operational without
In this case, have your vehicle
In this case, have your vehicle
the assistance of the anti-lock
inspected by an authorized
inspected by an authorized
brake system).
HYUNDAI dealer.
HYUNDAI dealer.
In this case, have your vehicle
inspected by an authorized
HYUNDAI dealer.
3-97
Convenient features of your vehicle
NOTICE - Electronic Brake
Electronic Power
WARNING
force Distribution (EBD)
Steering (EPS)
System Warning Light
Warning Light
Electronic Brake force
(if equipped)
Distribution (EBD) System
When the ABS Warning Light is on
Warning Light
or both ABS and Parking Brake &
Brake Fluid Warning Lights are on,
This warning light illuminates:
When both ABS and Parking
the speedometer, odometer, or trip-
Brake & Brake Fluid Warning
• Once you set the Engine Start/Stop
meter may not work. Also, the EPS
button to the ON position.
Lights are on, the brake system
Warning Light may illuminate and
will not work normally and you
- It remains on until the engine is
the steering effort may increase or
may experience an unexpected
started.
decrease.
and dangerous situation during
In this case, have your vehicle
• When there is a malfunction with
sudden braking.
inspected by an authorized
the EPS.
In this case, avoid high speed
HYUNDAI dealer.
In this case, have your vehicle
driving and abrupt braking.
inspected by an authorized
In this case, have your vehicle
HYUNDAI dealer.
inspected by an authorized
HYUNDAI dealer.
3-98
Malfunction Indicator
Charging System
CAUTION
Lamp (MIL)
Warning Light
Malfunction Indicator Lamp
This warning light illuminates:
(MIL)
If this warning light comes on while
the engine is running, the battery is
Once you set the or Engine
Driving with the Malfunction
not being charged. Immediately turn
Start/Stop button to the ON position.
Indicator Lamp
(MIL) on may
off all electrical accessories. Try not
- It remains on until the engine is
cause damage to the emission
3
to use electrically operated controls,
started.
control systems which could
such as the power windows. Keep the
When there is a malfunction with
affect drivability and/or fuel
engine running; starting the engine
the emission control system.
economy.
will quickly discharge the battery.
In this case, have your vehicle
inspected by an authorized
If there is a malfunction with either
HYUNDAI dealer.
CAUTION
the alternator or electrical charging
Gasoline Engine
system:
1.Drive carefully to the nearest safe
If the Malfunction Indicator
location and stop your vehicle.
Lamp (MIL) illuminates, poten-
tial catalytic converter damage
2.Turn the engine off and check the
alternator drive belt for looseness
is possible which could result in
loss of engine power.
or breakage.
In this case, have your vehicle
If the belt is adjusted properly,
inspected by an authorized
there may be a problem in the elec-
HYUNDAI dealer.
trical charging system.
In this case, have your vehicle
inspected by an authorized
HYUNDAI dealer.
3-99
Convenient features of your vehicle
Engine Oil Pressure
Low Fuel Level
CAUTION
Warning Light
Warning Light
Engine Oil Pressure Warning
This warning light illuminates:
light
This warning light illuminates:
• Once you set the Engine
When the fuel tank is nearly empty.
To prevent severe engine dam-
Start/Stop button to the ON posi-
age, after the Engine Oil
tion.
Pressure Warning Light is illu-
If the fuel tank is nearly empty:
- It remains on until the engine is
minated and as soon as it is
Add fuel as soon as possible.
started.
safe to do so, turn the engine
• When the engine oil pressure is low.
off and check the oil level.
CAUTION
If the oil level is low, fill the
engine oil to the proper level
If the engine oil pressure is low:
Low Fuel Level
and start the engine again. If
1.Drive carefully to the nearest safe
the light stays on with the
Driving with the Low Fuel Level
location and stop your vehicle.
engine running, turn the engine
warning light on or with the fuel
2.Turn the engine off and check the
off immediately.
level below “E” can cause the
engine oil level (For more details,
In this case, have your vehicle
engine to misfire and damage the
refer to "Engine Oil" in chapter 7).
catalytic converter (if equipped).
inspected by an authorized
If the level is low, add oil as required.
HYUNDAI dealer.
If the warning light remains on after
adding oil and restarting the
engine or if oil is not available, turn
off the engine. There is a mechani-
cal problem that needs to be
repaired before you can continue
driving. In this case, have your
vehicle inspected by an authorized
HYUNDAI dealer.
3-100
Low Tire Pressure
This warning light remains on after
Door Ajar Warning
Warning Light
blinking for approximately 60 sec-
Light
onds or repeats blinking and off at
the intervals of approximately 3
This warning light illuminates:
This warning light illuminates:
seconds:
• Once you set the Engine Start/Stop
When a door is not closed securely.
• When there is a malfunction with
button to the ON position.
the TPMS.
- It illuminates for approximately 3
3
In this case, have your vehicle
Trunk Open Warning
seconds and then goes off.
inspected by an authorized
Light
• When one or more of your tires are
HYUNDAI dealer.
significantly underinflated
(The
This warning light illuminates:
location of the underinflated tires
For more details, refer to "Tire
are displayed on the LCD display).
When the trunk lid is not closed
Pressure Monitoring System
securely.
(TPMS)" in chapter 6.
For more details, refer to "Tire
Pressure Monitoring System
WARNING
All Wheel Drive (AWD)
(TPMS)" in chapter 6.
Warning Light
Safe Stopping
(if equipped)
This warning light illuminates:
The TPMS cannot alert you to
severe and sudden tire damage
• Once you set the Engine Start/Stop
caused by external factors.
button to the ON position.
If you notice any vehicle insta-
- It illuminates for approximately 3
bility, immediately take your
seconds and then goes off.
foot off the accelerator pedal,
• When there is a malfunction with
apply the brakes gradually with
the AWD system.
light force, and slowly move to
In this case, have your vehicle
a safe position off the road.
inspected by an authorized
HYUNDAI dealer.
3-101
Convenient features of your vehicle
Electric Parking Brake
Autonomous
Master Warning Light
(EPB) Warning Light
EPB
Emergency Braking
(if equipped)
(AEB) Warning light
(if equipped)
This indicator light illuminates
This warning light illuminates:
This warning light illuminates :
• When there is a malfunction on the
• When the AEB system is turned off.
• Once you set the Engine Start/Stop
pre-safe seat belt, low washer,
button to the ON position.
• When the radar or its cover is
electronic control suspension, or
- It illuminates for approximately 3
stained. Remove the stains with a
advanced smart cruise control. To
seconds and then goes off.
soft cloth.
identify the details of the warning,
• When there is a malfunction with
look at the LCD display.
• When there is a malfunction with
the EPB.
AEB. In this case, have your vehi-
cle inspected by an authorized
In this case, have your vehicle
HYUNDAI dealer.
inspected by an authorized
HYUNDAI dealer.
NOTICE - Electric Parking
Brake (EPB) Warning Light
The Electric Parking Brake (EPB)
Warning Light may illuminate when
the Electronic Stability control
(ESC) Indicator Light comes on to
indicates that the ESC is not work-
ing properly (This does not indicate
malfunction of the EPB).
3-102
Indicator Lights
Electronic Stability
Immobilizer Indicator
Control (ESC) OFF
Light
Electronic Stability
Indicator Light
Control (ESC) Indicator
Light
This indicator light illuminates:
This indicator light illuminates:
This indicator light illuminates for
• Once you set the Engine Start/Stop
up to 30 seconds:
• Once you set the Engine Start/Stop
button to the ON position.
button to the ON position.
• When the vehicle detects the
3
- It illuminates for approximately 3
smart key in the vehicle properly
- It illuminates for approximately 3
seconds and then goes off.
seconds and then goes off.
while the Engine Start/Stop button
is ACC or ON.
• When there is a malfunction with
• When you deactivate the ESC sys-
tem by pressing the ESC OFF but-
- At this time, you can start the
the ESC system.
ton.
engine.
In this case, have your vehicle
- The indicator light goes off after
inspected by an authorized
For more details, refer to
starting the engine.
HYUNDAI dealer.
"Electronic Stability Control (ESC)"
in chapter 5.
This indicator light blinks for a few
This indicator light blinks:
seconds:
While the ESC is operating.
• When the smart key is not in the
vehicle.
For more details, refer to
"Electronic Stability Control (ESC)"
- At this time, you can not start the
in chapter 5.
engine.
3-103
Convenient features of your vehicle
This indicator light illuminates for
Turn Signal Indicator
Low Beam Indicator
2 seconds and goes off:
Light
Light (if equipped)
• When the vehicle can not detect
the smart key which is in the vehi-
This indicator light blinks:
This indicator light illuminates:
cle while the Engine Start/Stop
• When you turn the turn signal light
• When the headlights are on.
button is ON.
on.
In this case, have your vehicle
inspected by an authorized
High Beam Indicator
HYUNDAI dealer.
If any of the following occurs, there
Light
may a malfunction with the turn sig-
nal system. In this case, have your
This indicator light blinks:
This indicator light illuminates:
vehicle inspected by an authorized
• When the battery of the smart key
HYUNDAI dealer.
• When the headlights are on and in
is weak.
the high beam position.
- The indicator light does not blink
- At this time, you can not start the
but illuminates.
• When the turn signal lever is pulled
engine. However, you can start the
into the Flash-to-Pass position.
- The indicator light blinks more
engine if you press the Engine
rapidly.
Start/Stop button with the smart
- The indicator light does not illumi-
key. (For more details, refer to
nate at all.
"Starting the Engine" in chapter
5).
• When there is a malfunction with
the immobilizer system.
In this case, have your vehicle
inspected by an authorized
HYUNDAI dealer.
3-104
Smart High Beam indi-
Front Fog Indicator
AUTO HOLD Indicator
AUTO
cator
Light
Light (if equipped)
HOLD
This warning light illuminates :
This indicator light illuminates:
This indicator light illuminates:
• When the high-Beam is on with the
• When the front fog lights are on.
[White] When you activate the auto
light switch in the AUTO light posi-
hold system by pressing the AUTO
tion.
HOLD button.
Cruise Indicator Light
3
• If your vehicle detects oncoming or
[Green] When you stop the vehicle
preceding vehicles, the Smart High
completely by depressing the
Beam system will switch the high
brake pedal with the auto hold sys-
beam to low beam automatically.
This indicator light illuminates:
tem activated.
• When the cruise control system is
[Yellow] When there is a malfunc-
For more details, refer to "Smart
tion with the auto hold system.
enabled.
High Beam" in this chapter.
In this case, have your vehicle
For more details, refer to "Cruise
inspected by an authorized
Light ON Indicator
Control System" in chapter 5.
HYUNDAI dealer.
Light
For more details, refer to "Auto
Cruise SET Indicator
Hold" in chapter 5.
This indicator light illuminates:
Light
SET
• When the tail lights or headlights
are on.
This indicator light illuminates:
• When the cruise control speed is
set.
For more details, refer to "Cruise
Control System" in chapter 5.
3-105
Convenient features of your vehicle
SPORT/SNOW Mode
ECO mode indicator
LKAS (Lane Keeping
Indicator Light
SPORT
Light
ECO
Assistant System)
indicator (if equipped)
This indicator light illuminates :
SNOW
The LKAS indicator will illuminate
• When you select “ECO” mode as
drive mode.
when you turn the lane keeping
assistant system on by pressing the
This indicator light illuminates:
LKAS button.
For more details, refer to "LCD
• When you select "SPORT/SNOW"
Display" in this chapter.
If there is a problem with the system,
mode as drive mode.
the yellow LKAS indicator will illumi-
nate.
WARNING
For more details, refer to "Drive
Mode Integrated Control System"
For more details, refer to "Lane
Do not watch the ECO indicator
in chapter 5.
Keeping Assistant System (LKAS)"
light while driving. This will dis-
in chapter 5.
tract you and may cause an
accident that results in severe
personal injury.
3-106
HEAD UP DISPLAY (HUD) (IF EQUIPPED)
Description
The head up display image on the
WARNING
windshield glass may be invisible
when:
Head Up Display
- Sitting posture is bad.
Do not tint the front wind-
- Wearing a polarized sunglasses.
shield glass or add other
- There is an object on the cover of
types of metallic coating.
the head up display.
Otherwise, the head up dis-
3
- Driving on a wet road.
play image may be invisible.
- An inadequate lighting is turned
Do not place any accessories
on inside the vehicle.
on the crash pad or attach any
- Any light comes from the outside.
objects on the windshield
glass.
ODH044065N
- Wearing glasses.
If the head up display image is not
The head up display is a transparent
shown well, adjust the height or
display which projects a shadow of
illumination of the head up display
some information of the instrument
in the LCD display.
cluster and navigation on the wind-
shield glass.
For more details, refer to "LCD
Display" in this chapter.
• When the head up display needs
inspection or repair, have your
vehicle inspected by an authorized
HYUNDAI dealer.
3-107
Convenient features of your vehicle
Head Up Display ON/OFF
Head Up Display Information
CAUTION
When replacing the front wind-
shield glass of the vehicles
equipped with the head up dis-
play, replace it with a wind-
shield glass designed for the
head up display operation.
Otherwise, duplicated images
may be displayed on the wind-
shield glass.
ODH045283N
ODH043312N
To activate the head up display,
1. Turn By Turn
(TBT) navigation
select
“Head-up Display” on the
information
“User Settings Mode” in the cluster.
2. Road signs
If you do not select
“Head-up
3. Speedometer
Display”, the head up display will be
4. Cruise setting speed
deactivated.
5. Advanced Smart Cruise Control
(ASCC) information (if equipped)
6. Lane Keeping Assist System
(LKAS) information (if equipped)
3-108
7. Blind Spot Detection (BSD) sys-
Head Up Display Setting
tem information (if equipped)
On the LCD display, you can change
8. Warning lights (Low fuel)
the head up display settings as fol-
9. Audio/Video information
lows.
On the "User settings Mode" of the
1. Head up display ON/OFF
LCD display, you can activate or
2. Display height
deactivate the Turn By Turn (TBT)
3. Rotation
3
navigation, smart cruise control
4. Illumination
(scc),
Lane Keeping Assist
System(LKAS), and Blind Spot
5. Contents setting
Detection (BSD) system information.
6. Speedometer number size
7. Speedometer number color
NOTICE
If you select the Turn By Turn
For more details, refer to "LCD
(TBT) navigation information as
Display" in this chapter.
HUD contents, the Turn By Turn
(TBT) navigation information will
not be displayed on the LCD
Display.
3-109
Convenient features of your vehicle
LIGHT
Exterior lights
CAUTION
Lighting control
Do not cover or spill anything
on the sensor (1) located on
the instrument panel.
Do not clean the sensor using
a window cleaner, the cleanser
may leave a light film which
could interfere with sensor
operation.
ODH044073N
If your vehicle has window tint
or other types of metallic
AUTO light position
coating on the front wind-
ODH044171N
The parking lamp and headlamp will
shield, the AUTO light system
be turned ON or OFF automatically
To operate the lights, turn the knob at
may not work properly.
depending on the amount of light
the end of the control lever to one of
outside the vehicle.
the following positions:
(1) DRL OFF position
Even with the AUTO light feature in
(2) AUTO light position
operation, it is recommended to
(3) Parking lamp position
manually turn ON the lamps when
(4) Headlamp position
driving at night or in a fog, or when
you enter dark areas, such as tun-
nels and parking facilities.
3-110
High beam operation
3
ODH044172N
ODH044173N
Parking lamp position (
)
Headlamp position (
)
ODH044175N
The parking lamp, license plate lamp
The headlamp, parking lamp, license
To turn on the high beam headlamp,
and instrument panel lamp are turned
plate lamp and instrument panel lamp
push the lever away from you. The
ON.
are turned ON.
lever will return to its original position.
The high beam indicator will light
NOTICE
when the headlamp high beams are
The Engine Start/Stop button must
switched on.
be in the ON position to turn on the
To turn off the high beam headlamp,
headlamp.
pull the lever towards you. The low
beams will turn on.
WARNING
Do not use high beam when there
are other vehicles approaching
you. Using high beam could
obstruct the other driver's vision.
3-111
Convenient features of your vehicle
Smart High Beam
Operating condition
(if equipped)
1. Place the light switch in the AUTO
position.
2. Turn on the high beam by pushing
the lever away from you.
The smart high beam (
) indica-
tor will illuminate.
3. The Smart High Beam will turn on
when vehicle speed is above 28
mph (45km/h).
ODH044174N
• If the lever is pushed away when
the Smart High Beam is operating,
To flash the high beam headlamp,
the Smart High Beam will turn off
pull the lever towards you, then
ODH043135N
and the high beam will be on con-
release the lever. The high beams
The Smart High Beam is a system
tinuously. The smart high beam
will remain ON as long as you hold
that automatically adjusts the head-
(
) indicator will turn off.
the lever towards you.
lamp range (switches between high
• If the lever is pulled towards you
beam and low beam) according to
when the Smart High Beam is
the brightness of other vehicles and
operating, the Smart High Beam
road conditions.
will turn off.
4. If the light switch is placed to the
headlamp position, the Smart
High Beam will turn off and the low
beam will be on continuously.
3-112

 

 

 

 

 

 

 

Content   ..  9  10  11  12   ..