Content   ..  2  3  4  5   ..

Hyundai Getz (2010 year). Instruction - part 4

1- 46 FEATURES OF YOUR HYUNDAI

B260A01TB-GAT

INSTRUMENT CLUSTER AND INDICATOR LIGHTS

A Type (Without Trip Computer)

OTB028102

1- 48 FEATURES OF YOUR HYUNDAI

B260B01TB-GAT

B Type (With Trip Computer)

OTB028103

1- 50 FEATURES OF YOUR HYUNDAI

B260B01S-GAT

B230T02NF-GAT

SRS (Airbag) Service

Passenger's Front Airbag

!

Reminder Indicator (SRI)

OFF Indicator Light

CAUTION:

(If Installed)

(If Installed)

If there is a malfunction of the

passenger's front airbag ON/OFF

The SRS service reminder indicator

The passenger's front airbag OFF indi-

switch, the passenger's front airbag

(SRI) comes on and flashes for about

cator illuminates for about 4 seconds

OFF indicator will not illuminate and

6 seconds after the ignition key is

after the ignition key is turned to the

the passenger's front airbag will in-

turned to the "ON" position or after the

"ON" position or after the engine is

flate in frontal impact crashes even if

engine is started, after which it will go

started, and then it will go off in 3

the passenger's front airbag ON/OFF

out.

seconds.

switch is set to the "OFF" position.

The passenger's front airbag OFF indi-

If the passenger's front airbag OFF

This light also comes on when the SRS

cator also comes on when the

indicator will not illuminate when

is not working properly. If the SRI does

passenger's front airbag ON/OFF switch

the passenger's front airbag ON/OFF

not come on, or continuously remains

is set to "OFF" position and turns off

switch is set to the "OFF" position,

on after flashing for about 6 seconds

when the passenger's front airbag ON/

have an authorized Hyundai dealer

when you turned the ignition key to the

OFF switch is set to "ON" position.

inspect the passenger's front airbag

"ON" position or started the engine, or

ON/OFF switch and the SRS airbag

if it comes on while driving, have the

system as soon as possible.

SRS inspected by an authorized

Hyundai Dealer.

FEATURES OF YOUR HYUNDAI 1- 51

B260P02Y-GAT

B260D01A-AAT

ABS Service Reminder

Turn Signal Indicator

!

Indicator (SRI)

WARNING:

Lights

(If Installed)

If both ABS SRI and Parking Brake/

The blinking green arrows on the in-

Brake fluid level warning lights re-

When the key is turned to the "ON"

strument panel show the direction indi-

main "ON" or come on while driv-

position, the Anti-Lock Brake System

cated by the turn signals. If the arrow

ing, there may be a problem with

will come on and then go off in a few

comes on but does not blink, blinks

E.B.D (Electronic Brake Force Dis-

seconds. If the ABS SRI remains on,

more rapidly than normal, or does not

tribution).

comes on while driving, or does not

illuminate at all, a malfunction in the

If this occurs, avoid sudden stops

come on when the key is turned to the

turn signal system is indicated. Your

and have your vehicle checked by

"ON" position, this indicates that there

dealer should be consulted for repairs.

your Hyundai dealer as soon as

may be a problem with the ABS.

possible.

If this occurs, have your vehicle

checked by your Hyundai dealer as

B260F01A-AAT

soon as possible. The normal braking

B260C01A-AAT

High Beam Indicator

system will still be operational, but

O/D OFF Indicator

Light

without the assistance of the anti-lock

(Automatic transaxle

brake system.

The high beam indicator light comes

only) (If Installed)

on whenever the headlights are

When the overdrive switch is turned

switched to the high beam or flash

on, the overdrive off indicator will go

position.

out. This amber indicator will be illumi-

nated when the overdrive switch is

turned off.

1- 52 FEATURES OF YOUR HYUNDAI

B260G01A-AAT

B260H03A-AAT

other time, you should slow the vehicle

Oil Pressure Warning

Parking Brake/Brake

and bring it to a complete stop in a safe

Light

Fluid Level Warning

location off the roadway.

Light

The brake warning light indicates that

the brake fluid level in the brake master

!

CAUTION:

cylinder is low and hydraulic brake fluid

!

If the oil pressure warning light

WARNING:

conforming to DOT 3 or DOT 4 specifi-

stays on while the engine is run-

If you suspect brake trouble, have

cations should be added. After adding

ning, serious engine damage may

your brakes checked by a Hyundai

fluid, if no other trouble is found, the car

result. The oil pressure warning

dealer as soon as possible. Driving

should be immediately and carefully

light comes on whenever there is

your car with a problem in either the

driven to a Hyundai dealer for inspec-

insufficient oil pressure. In normal

brake electrical system or brake

tion. If further trouble is experienced,

operation, it should come on when

hydraulic system is dangerous, and

the vehicle should not be driven at all

the ignition switch is turned on,

could result in a serious injury or

but taken to a dealer by a professional

then go out when the engine is

death.

towing service.

started. If the oil pressure warning

Your Hyundai is equipped with dual-

light stays on while the engine is

diagonal braking systems. This means

running, there may be a serious

Warning Light Operation

you still have braking on two wheels

malfunction. If this happens, stop

even if one of the dual systems should

The parking brake/brake fluid level

the car as soon as it is safe to do so,

fail. With only one of the dual systems

warning light should come on when the

turn off the engine and check the oil

working, more than normal pedal travel

parking brake is applied and the igni-

level. If the oil level is low, fill the

and greater pedal pressure are re-

tion switch is turned to "ON" or

engine oil to the proper level and

quired to stop the car. Also, the car will

"START". After the engine is started,

start the engine again. If the light

not stop in as short a distance with only

the light should go out when the park-

stays on with the engine running,

half of the brake system working. If the

ing brake is released.

turn the engine off immediately. In

brakes fail while you are driving, shift

If the parking brake is not applied, the

any instance where the oil light stays

to a lower gear for additional engine

warning light should come on when the

on when the engine is running, the

braking and stop the car as soon as it is

ignition switch is turned to "ON" or

engine should be checked by an

safe to do so.

"START", then go out when the engine

authorized Hyundai dealer before the

starts. If the light comes on at any

car is driven again.

FEATURES OF YOUR HYUNDAI 1- 53

B260J01S-GAT

B260K01B-GAT

B260N03FC-GAT

Charging System

Tail Gate Open Warning

Malfunction Indicator

Warning Light

Light

Light (If installed)

The charging system warning light

This light remains on unless the tail

This light illuminates when there is a

should come on when the ignition is

gate is completely closed.

malfunction of an exhaust gas related

turned on, then go out when the engine

component, and the system is not

is running. If the light stays on while the

functioning properly so that the exhaust

B260L01A-GAT

engine is running, there is a malfunc-

gas regulation values are not satisfied.

Door Ajar Warning Light

tion in the electrical charging system. If

This light will illuminate when the igni-

the light comes on while you are driv-

tion key is tuned to the "ON" position,

ing, stop, turn off the engine and check

The door ajar warning light warns you

and will go out after the engine start. If

under the hood. First, make certain the

that a door is not completely closed.

it illuminates while driving, or does not

generator drive belt is in place. If it is,

illuminate when the ignition key is turned

check the tension of the belt.

to the "ON" position, take your car to

B260M01A-AAT

And then, have the system checked by

your nearest authorized Hyundai dealer

Low Fuel Level Warning

your Hyundai dealer.

and have the system checked.

Light

The low fuel level warning light comes

!

on when the fuel tank is approaching

CAUTION:

empty. When it comes on, you should

If the drive belt (generator belt) is

add fuel as soon as possible. Driving

loosen, broken, or mission while the

with the fuel level warning light on or

vehicle is driving, there may be a

with the fuel level below "E" can cause

serious malfunction, engine could

the engine to misfire and damage the

overheat because this belt also

catalytic converter.

drives the water pump.

1- 54 FEATURES OF YOUR HYUNDAI

B265E01TB-GAT

B260T01TB-GAT

Seat Belt Warning Light

Electric Power

!

CAUTION: Diesel engine

and Chime (E.C only)

SteeringSystem (EPS)

When the malfunction indicator light

Warning Light

The seat belt warning light and chime

is blinks, it may stop blinking after

will activate to the following table.

(If installed)

driving the vehicle at more than

60km/h (37 mph) or at more than

User (Driver) Condition

This indicator light comes on about 4

Seat Belt WarningLight

second gear with 1500 ~ 2000 engine

seconds after the ignition key is turned

Seat Belt

Ignition Switch

rpm for a certain time (for about 25

to the "ON" position or after the engine

Unbuckled

ON

Stay on until buckled up

minutes).

is started, it will go out.

Buckled

ON

Come on for 6 seconds

This light also comes on when the EPS

If the malfunction indicator light con-

tinues to be blinked in spite of the

Unbuckled

ON *1

Blink until buckled up

has some troubles. If it comes on while

procedure, please visit an autho-

Buckled 

driving, have your vehicle inspected by

ON

Blink until buckled up*2

Unbuckled

rized HYUNDAI dealer and then check

an authorized Hyundai Dealer.

the DPF system.

*1) When the ignition key is turned from

If you continue to drive with the

"OFF" position to "ON" within 1

malfunction indicator light blinking

minute.

*2) If the vehicle speed exceeds 9km/

!

for a long time, the DPF system can

CAUTION:

be damaged and fuel consumption

h, the seat belt chime also sounds

When you move the electric power

can be worsen.

for about 1~2 minutes.

steering back-end and forth-end

If the vehicle speed is below 9km/h,

continuously in stop position, steer-

1 minute later the seat belt chime

ing wheel plays heavily to operate

B260E01TB-GAT

also sounds for about 1~2 minutes.

anti-overload system. It is normal

Seat Belt Warning Light

condition. It returns to be normal

(Except E.C)

NOTE:

getting time.

The seat belt warning light blinks for

If the driver's seat belt is operated in

about 6 seconds when the ignition key

this order "unbuckled  buckled 

is turned from the "OFF" position to the

unbuckled  buckled  unbuck-

"ON".

led" within 9 seconds after the seat

belt is buckled, the seat belt warning

light and chime will not activate.

FEATURES OF YOUR HYUNDAI 1- 55

B265C01LZ-AAT

B260U01TB-GAT

B260S01B-GAT

Electronic Stability

Immobilizer Indicator

Diesel Pre-heat Indicator

Program Indicator Lights

Light (If installed)

Light-Amber

(If installed)

(Diesel Engine)

This indicator light comes on for some

The electronic stability program indica-

seconds after the ignition key is turned

The indicator light illuminates amber

tors change operation according to the

to the "ON" position. At this time, you

when the ignition switch is placed at

ignition switch position and whether the

can start the engine. The light goes out

the "ON" position. The engine can be

system is in operation or not.

after the engine is running. In case this

started after the pre-heat indicator light

They will illuminate when the ignition

light goes out before you start the en-

goes off. The illuminating time varies

key is turned to the "ON" position, but

gine, you must turn to the "LOCK"

with the water temperature, air tem-

should go out after three seconds. If the

position and restart the engine. In case

perature and battery condition.

ESP or ESP-OFF indicator stays on,

this light blinks for five seconds when

take your car to your authorized Hyundai

the ignition key is turned to "ON" posi-

NOTE:

dealer and have the system checked.

tion, this indicates that the immobilizer

If the engine were not started 10

See section 2 for more information

system is out of order. At this time,

seconds after the preheating is com-

about the ESP.

refer to the explanation of the Limp

pleted, turn the ignition key once

home procedure(See page 1-6) or con-

more to the "LOCK" position, and

sult to the Hyundai dealer.

then to the "ON" position, in order

to preheat again.

1- 56 FEATURES OF YOUR HYUNDAI

B265A01B-GAT

B290A02TB-AAT

B900A01A-GAT

Fuel Filter Warning

Engine Coolant Tempera-

ACOUSTIC WARNING SOUND

Light-Red (Diesel Engine)

ture Indicator (If installed)

(If Installed)

This light illuminates when the ignition

The acoustic warning chime sounds when

switch is set to the "ON" position and

!

the tail lights are on and the door in driver

WARNING:

goes off after the engine has started. If

side is open. This prevents the battery

Never remove the radiator cap when

it lights up while the engine is running,

from discharging when the car is left with

the engine is hot. The engine cool-

it indicates that water has accumu-

the tail lights on. The chime sounds until

ant is under pressure and could

lated inside the fuel filter. If this hap-

the tail lights are turned off.

erupt and cause severe burns. Wait

pens, remove the water from the fuel

until the engine is cool before re-

filter. (Refer to "6-28 page")

moving the radiator cap.

B270A01A-AAT

BRAKE PAD WEAR WARNING

The indicator shows the temperature of

SOUND

the engine coolant when the ignition

The front disc brake pads have wear

switch is ON.

indicators that should make a high-

The red indicator illuminates if the tem-

pitched squealing or scraping noise

perature of the engine coolant is above

when new pads are needed. The sound

120±3°C (248±5.5°F).

may come and go or be heard all the

Do not continue driving with an over-

time when the vehicle is moving. It

heated engine. If your vehicle over-

may also be heard when the brake

heats, refer to “Overheating” in the In-

pedal is pushed down firmly. Exces-

dex.

sive rotor damage will result if the worn

pads are not replaced. See your

NOTE:

Hyundai dealer immediately.

If the red engine temperature indica-

tor illuminates, it indicates overheat-

ing that may damage the engine.

FEATURES OF YOUR HYUNDAI 1- 57

B280A02A-AAT

B300A01A-GAT

B330A02A-AAT

FUEL GAUGE

SPEEDOMETER

TACHOMETER

A Type

B Type

A Type

B Type

HTB2019

B300A01TB

B330A01TB

The needle on the gauge indicates the

Your Hyundai's speedometer is cali-

The tachometer registers the speed of

approximate fuel level in the fuel tank.

brated in kilometers per hour or miles

your engine in revolutions per minute

The fuel capacity is given in Section 9.

per hour.

(rpm).

!

!

CAUTION:

CAUTION:

The engine should not be raced to

Avoid driving with a very low fuel

such a speed that the needle enters

level. If you run out of fuel, it could

the red zone on the tachometer face.

cause the engine to misfire and re-

This can cause severe engine dam-

sult in excessive loading of the cata-

age and may void your warranty.

lytic converter.

1- 58 FEATURES OF YOUR HYUNDAI

B310B02TB-GAT

2. Trip odometer

1. Odometer

ODOMETER/TRIP ODOMETER

o This mode indicates the drive dis-

A Type

tance travelled since the last drive

time reset.

1

o Pressing the trip switch for more

than 1 second, when the drive dis-

tance is being displayed, clears the

2

drive distance to zero.

B Type

o Refer to the explanation of the trip

computer (see page 1-59, Drive Dis-

3

tance).

HTB010

B310B01TB

B TYPE

(WITHOUT TRIP COMPUTER)

The odometer records the total driving

A TYPE

distance in kilometers or miles, and is

(WITH TRIP COMPUTER)

useful for keeping a record for mainte-

Function of digital odometer/trip

1. Odometer

nance intervals.

odometer

The odometer records the total driving

Pushing in the reset switch when the

distance in kilometers or miles, and is

NOTE:

ignition switch is turned "ON" will dis-

useful for keeping a record for mainte-

Any alteration of the odometer may

play the following sequence:

nance intervals.

void your warranty coverage.

NOTE:

2,3 Trip odometer

Any alteration of the odometer may

Records the distance of 2 trips in kilo-

void your warranty coverage.

meters or miles.

FEATURES OF YOUR HYUNDAI 1- 59

TRIP A: Distance you have traveled

1. Outside temperature

from your origination point to a first

destination.

TRIP B: Distance from the first destina-

tion to the final destination.

To shift from TRIP A to TRIP B, press

the trip switch. When pressed for 1

second, it will reset to 0.

B400B03TB-GAT

B400B06TB

TRIP COMPUTER (If Installed)

Trip Computer Switch

B400B02TB

This mode indicates the outside tem-

o The trip computer switch is used to

perature between -40 C (-40 F) and

zero the multi-functional display

75 C (167 F) .

mode.

o Pushing in the trip computer switch

changes the display as follows;

2. Distance to empty

OUTSIDE TEMPERATURE

DISTANCE TO EMPTY

B400B01TB

The trip computer is the microcom-

puter-controlled driver information

AVERAGE CONSUMPTION

gauge that displays information re-

lated to driving, such as outside tem-

DRIVE DISTANCE

perature distance to empty, drive dis-

tance and average consumption on

B400B03TB

the LCD.

1- 60 FEATURES OF YOUR HYUNDAI

o This mode indicates the estimated

3. Average Consumption

4. Drive Distance

distance to empty from the current

fuel in the fuel tank and distance to

empty symbol.

o When refueling with more than 6

liters, the trip computer will recog-

nize refueling.

o When the battery has been rein-

stalled after being discharged or

disconnected, drive more than 64km

for an accurate distance to empty.

B400B04TB

NOTE:

B400B05TB

o When the distance to empty is less

o

This mode indicates the drive dis-

o

This mode indicates the average

than 50 km, the symbol will al-

tance travelled since the last drive

consumption since the data reset.

ways come on and the distance to

time reset.

o

It displays per 10 seconds after you

empty digits will indicate "---" with

o

Pressing the trip computer switch for

drive over 50m and 10 seconds.

flash until more fuel is added.

more than 1 second, when the drive

o

Calculation Method

o The distance to empty can differ

distance is being displayed, clears

from the actual tripmeter accord-

the drive distance to zero.

Total Cruise Distance(Miles)

ing to driving conditions.

MPG =

Total Fuel Consumption (G)

o The distance to empty can vary

according to the driving condi-

Total Fuel Consumption(L) x 100

L/100km =

tions, driving pattern or vehicle

Total Cruise Distance (km)

speed.

FEATURES OF YOUR HYUNDAI 1- 61

B340A01A-AAT

B340B01A-AAT

B340C04FC-GAT

COMBINATION TURN SIGNAL,

Lane Change Signal

Headlight Switch

HEADLIGHT AND HIGH-BEAM

SWITCH

Turn Signal Operation

Pulling down on the lever causes the

turn signals on the left side of the car to

blink. Pushing upwards on the lever

causes the turn signals on the right

side of the car to blink. As the turn is

completed, the lever will automatically

return to the center position and turn

off the turn signals at the same time. If

OMC049600

OMC049601

either turn signal indicator light blinks

To indicate a lane change, move the

To operate the headlights, turn the bar-

more rapidly than usual, goes on but

lever up or down to a point where it

rel on the end of the multi-function

does not blink, or does not go on at all,

begins flashing.

switch. The first position turns on the

there is a malfunction in the system.

The lever will automatically return to

parking lights, sidelights, tail lights and

Check for a burned-out fuse or bulb or

the center position when released.

instrument panel lights. The second

see your Hyundai dealer.

position turns on the headlights.

NOTE:

The ignition must be in the "ON"

position to turn on the headlights.

1- 62 FEATURES OF YOUR HYUNDAI

B340F01A-GAT

B340D01A-AAT

Parking light auto cut (If installed)

Daytime Running Lights

High-beam Switch

o The purpose of this feature is to

(If Installed)

prevent the battery from being dis-

charged.

Your Hyundai is equipped with day-

The system automatically turns off

time running lights. The daytime run-

the small light when the driver re-

ning lights are used to improve visibil-

moves the ignition key and opens

ity for oncoming traffic. Your vehicle

the driver- side door.

daytime running lights are designed to

o With this feature, the parklight will be

remain on continuously when the en-

turned off automatically if the driver

gine is operating even though the head-

parks on the side of road at night.

light switch is in the "OFF" position.

However, the daytime running lights

If necessary, to keep the lights on when

will be off while the parking brake is

OSA049093

the ignition key is removed, perform the

applied.

To turn on the headlight high beams,

following :

push the lever forward (away from

1) Open the driver-side door.

you). The high beam indicator light will

2) Turn the parklights OFF and ON

come on at the same time. For low

again using the light switch on the

beams, pull the lever back toward you.

steering column.

Content   ..  2  3  4  5   ..