Honda Clarity Plug-in Hybrid (2018 year). Instruction - part 3
32
Quick
Referenc
e Guide
Deceleration Paddle Selector
When you release the accelerator pedal, you can control the rate of deceleration
without releasing your hands from the steering wheel. Using the deceleration
paddle selector situated on the steering wheel, you can sequentially shift through
four stages of deceleration.
Pull the
(
+ selector for a few seconds when you want to cancel the deceleration
paddle selector.
● When SPORT mode is OFF
If you pull back the paddle selector, the rate of deceleration will change
temporarily, and the stage will appear in the instrument panel.
● When SPORT mode is ON
If you pull back the paddle selector, the rate of deceleration will change and
the stage along with M will appear in the instrument panel.
When SPORT mode is
OFF, the deceleration
stage appears.
When SPORT mode is
ON, The deceleration
stage and M appear.
(
- Paddle
Selector
(
+ Paddle
Selector
Deceleration stage
VSA® On and Off
● The vehicle stability assist (VSA®) system
helps stabilize the vehicle during
cornering and helps maintain traction
while accelerating on loose or slippery
road surfaces.
● VSA® comes on automatically every time
you turn on the power system.
● To partially disable or fully restore VSA®
function, press and hold the button until
you hear a beep.
CMBS
TM
On and Off
(P 442)
● When a possible collision is likely
unavoidable, the CMBS
TM
can help you to
reduce the vehicle speed and the severity
of the collision.
● The CMBS
TM
is turned on every time you
start the engine.
● To turn the CMBS
TM
on or off, press and
hold the button until you hear a beep.
Tire Pressure Monitoring
System (TPMS)
(P 425)
● Detects a change in tire conditions and
overall dimensions due to decrease in tire
pressures.
● The TPMS is turned on automatically
every time you turn on the power system.
● A calibration procedure must be
performed when certain conditions arise.