Index Harley Davidson Harley Davidson FL, FLH (1966) Electra Glide. Rider handbook

Harley Davidson FL, FLH (1966) Electra Glide. Rider handbook - page 3

IMPORTANT
Do not allow "Gunk" cleaner to come in contact with seat or saddlebag material since it may cause discoloration. Use mild soap and water to clean these materials.

Harley-Davidson "Chrome Cleaner"

Use Harley-Davidson "Chrome Cleaner" to make the chrome parts of your motorcycle glitter and sparkle.

Harley-Davidson "Polish and Cleaner"

Harley-Davidson "Polish and Cleaner" is made to clean and polish the enamel parts and to maintain or restore these parts as close as possible to their original luster.

Harley-Davidson "Plastic Cleaner"

Harley-Davidson Plastic Cleaner, Part No. 98680-64 is recommended for cleaning of vinyl plastic seats. Cleaner comes in 15 oz. spray can. To use, spray on and allow to set for a few seconds. Then wipe clean with a damp cloth or sponge. Full instructions appear on the can.

MAINTENANCE
To obtain the longest possible life and the best possible performance from your motorcycle it is necessary not only to keep it adequately serviced, but also correctly adjusted to the tolerances to which it was manufactured. The following are the adjustments and general maintenance facts pertaining to your motorcycle.
ENGINE

Spark Plugs

Keep plugs clean and the gap between the electrodes adjusted to .025 inch to .030 inch. Clean with a sand blast cleaner.
Be sure your motorcycle is operating with the correct heat range plug best suited to your type of riding. If in doubt see your Harley-Davidson dealer. It is recommended that new plugs are installed every 5000 miles.

Content .. 1 2 3 4 ..