|
|
SA-55 3. Tear down the retainer ring from the drive shaft with the calipers, and take down the washer-steering knuckle shaft spline. 4. Tear down the front wheel hub and the steering knuckle together. 5. Screw off the nuts that connect the constant speed drive shaft to take down the constant speed drive shaft. 6. Check and repair the constant speed drive shaft Inject the molybdenum disulphide lithium grease of 100-110 g in the end of ball-cage type universal joint and the end of axially movable tripod universal joint. The ball-cage type universal joint and the axially movable tripod universal joint should swing freely, and no clipping stagnant is allowed. The dust cover should be prevented from deformation and every gripping loop shall be clamping tightly. Disassembly of Constant Speed Driving Shaft 1. Tear down the brake caliper. 2. Tear down the free hub Suspension System and Automobile Axle (SF/4WD) Constant Speed Driving Shaft |