Freightliner Cascadia. Manual - part 4

you find detailed instructions in this manual on the
maintenance operations to be performed. Perform all
M1 maintenance interval operations at the M2 main-
tenance interval.

Maintenance

Operation Number

Check

00–05

Perform All M1 Operations

15–01

Alternator, Battery, and Starter Check

20–01

Pressure Relief Cap Check

20–03

Fan Clutch Check (noise emission control)

25–02

Fluid Level Check, Hydraulic Clutch Control

26–02

Detroit

™

Automated Transmission Fluid Level Inspection

26–03

Detroit

™

Automated Transmission Air Filter Replacement

26–05

Eaton Fuller Transmission Fluid Level Inspection

26–06

Eaton Fuller Manual Transmission Air Filter/Regulator Check, Cleaning, or
Replacement

31–04

Fairing Bumper Wear Check

32–01

Suspension Inspection

32–02

Suspension U-Bolt Torque Check

33–01

Knuckle Pin Lubrication

33–02

Tie Rod Inspection

33–03

Tie Rod Lubrication

35–02

Axle Breather and Axle Lubricant Level Inspection

42–01

Air Brake System Valve Inspection

42–03

Air Dryer Inspection

42–04

Alcohol Evaporator Cleaning and Inspection

42–08

Meritor Slack Adjuster Lubrication

46–01

Drag Link Inspection

46–03

Power Steering Fluid Level Inspection

46–04

Power Steering Gear Lubrication

46–05

Drag Link Lubrication

46–06

Rack and Pinion Steering Gear Inspection

47–01

Fuel Filter Replacement

47–02

Fuel/Water Separator Element Checking and Replacement

47–08

CNG Fuel Cylinder Inspecting

†

54–01

Trailer Cable Inspection and Cleaning

60–01

Mirror Folding Check

60–04

Baggage Door and Sleeper Access Door Release Cable and Latch Lubrication

83–01

Air Conditioner Inspection

General Information

00/10

Maintenance

Operation Number

Check

83–02

Air Filter Replacement

For Schedule I vehicles with Detroit axles, complete this procedure once a year or every 25,000 miles (40 000 km), whichever comes first.

†

The fuel cylinder should be inspected every year or 100,000 miles (160 900 km), whichever comes first.

General Information

00/11

you find detailed instructions in this manual on the
maintenance operations to be performed. Perform all
M1 and M2 maintenance interval operations at the
M3 maintenance interval.

Maintenance

Operation Number

Check

00–05

Perform All M1 Operations

00–06

Perform All M2 Operations

09–01

Air Cleaner Inspection

20–02

Radiator Pressure-Flushing and Coolant Change

25–03

Fluid Change, Hydraulic Clutch Control

25–04

Clutch Replacement, Detroit

™

Automated Transmissions

26–01

Detroit

™

Automated Transmission Fluid Change and Magnetic Plug Cleaning

†

26–04

Eaton Fuller Transmission Fluid Change and Magnetic Plug Cleaning

‡

35–01

Axle Lubricant and Filter Change, and Magnetic Strainer Cleaning

42–02

Bendix Air Dryer Desiccant Replacement

42–09

Bendix E–6 Foot Control Valve Inspection and Lubrication

42–10

WABCO System Saver Air Dryer Desiccant Cartridge Replacement

46–02

Power Steering Fluid and Filter Change

46–07

Bellows Replacement, Rack and Pinion Steering Gear

47–05

LNG Vacuum Integrity Testing

49–02

CAT CGI Bellows Replacement

Replace the clutch assembly for Detroit automated transmissions at 750,000-mile (1 200 000-km) intervals.

†

For Schedule II vehicles with Detroit automated transmissions spec’d to haul more than 80,000 lb (36 000 kg), change the transmission fluid at 200,000-mile

(322 000-km) intervals.

‡

For Eaton Fuller transmissions, fluid change intervals are extended to 500,000 miles (800 000 km) on vehicles filled with synthetic transmission fluid.

General Information

00/12