Dodge Charger SRT8 (2010 year). Manual

Dial by Saying a Number

• Press the

button to begin.

• After the ⬙Ready⬙ prompt and the following beep, say

⬙Dial.⬙

• The system will prompt you to say the number you

want to call.

• For example, you can say ⬙234-567-8901⬙.
• The Uconnect™ Phone will confirm the phone number

and then dial. The number will appear in the display
of certain radios.

Call by Saying a Name

• Press the

button to begin.

• After the ⬙Ready⬙ prompt and the following beep, say

“Call.

⬙

• The system will prompt you to say the name of the

person you want to call.

• After the ⬙Ready⬙ prompt and the following beep, say

the name of the person you want to call. For example,
you can say

⬙John Doe,⬙ where John Doe is a previ-

ously stored name entry in the Uconnect™ phonebook
or downloaded phonebook. To learn how to store a
name in the phonebook, refer to

⬙Add Names to Your

Uconnect™ Phonebook,

⬙ in the phonebook.

• The Uconnect™ system will confirm the name and

then dial the corresponding phone number, which
may appear in the display of certain radios.

Add Names to Your Uconnect™ Phonebook

NOTE:

Adding names to the Uconnect™ Phonebook is

recommended when the vehicle is not in motion.

• Press the

button to begin.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook New Entry.⬙

• When prompted, say the name of the new entry. Use of

long names helps the Voice Command and it is recom-
mended. For example, say

⬙Robert Smith⬙ or ⬙Robert⬙

instead of

⬙Bob.⬙

• When prompted, enter the number designation (e.g.,

⬙Home,⬙ ⬙Work,⬙ ⬙Mobile,⬙ or ⬙Pager⬙). This will allow
you to store multiple numbers for each phonebook
entry, if desired.

• When prompted, recite the phone number for the

phonebook entry that you are adding.

After you are finished adding an entry into the phone-
book, you will be given the opportunity to add more
phone numbers to the current entry or to return to the
main menu.

The Uconnect™ Phone will allow you to enter up to 32
names in the phonebook with each name having up to
four associated phone numbers and designations. Each
language has a separate 32-name phonebook accessible
only in that language. In addition, if equipped and
supported by your phone, Uconnect™ Phone automati-
cally downloads your cellular phone’s phonebook.

Phonebook Download – Automatic Phonebook
Transfer From Cellular Phone
If equipped and specifically supported by your phone,
Uconnect™ Phone automatically downloads names (text
names) and number entries from the cellular phone’s
phonebook. Specific Bluetooth

威 Phones with Phone Book

Access Profile may support this feature. See Uconnect™
website for supported phones.

• To call a name from downloaded (or Uconnect™)

Phonebook, follow the procedure in “Call by Saying a
Name” section.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• Automatic download and update, if supported, begins

as soon as the Bluetooth

威 wireless phone connection is

made to the Uconnect™ Phone, for example, after you
start the vehicle.

• A maximum of 1000 entries per phone will be down-

loaded and updated every time a phone is connected
to the Uconnect™ Phone.

• Depending on the maximum number of entries down-

loaded, there may be a short delay before the latest
downloaded names can be used. Until then, if avail-
able, the previous downloaded phonebook is available
for use.

• Only the phonebook of the currently connected cellu-

lar phone is accessible.

• Only the cellular phone’s phonebook is downloaded.

SIM card phonebook is not part of the Mobile phone-
book.

• This downloaded phonebook cannot be edited or

deleted on the Uconnect™ Phone. These can only be
edited on the cellular phone. The changes are trans-
ferred and updated to Uconnect™ Phone on the next
phone connection.

Phonebook Download — Single Entry
If equipped and supported by your phone, Uconnect™
Phone allows the user to download entries from their
phone via Bluetooth

威. To use this feature, press the

button and say “Phonebook Download.” The system
prompts, “Ready to accept “V” card entry via
Bluetooth

威…” The system is now ready to accept phone-

book entries from your phone using the Bluetooth

威

Object Exchange Profile (OBEX). Please see your phone
Owner’s Manual for specific instructions on how to send
these entries from your phone.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

NOTE:

• The phone handset must support Bluetooth威 OBEX

transfers of phonebook entries to use this feature.

• Some phones cannot send phonebook entries if they

are already connected to any system via Bluetooth

威,

and you may see a message on the phone display that
the Bluetooth

威 link is busy. In this case, the user must

first disconnect or drop the Bluetooth

威 connection to

the Uconnect™ Phone, and then send the address
book entry via Bluetooth

威. Please see your phone

Owner’s Manual for specific instructions on how to
drop the Bluetooth

威 connection.

• If the phonebook entry is longer than 24 characters, it

will only use the first 24 characters.

Edit Uconnect™ Phonebook Entries

NOTE:

• Editing names in the phonebook is recommended

when the vehicle is not in motion.

• Automatic downloaded phonebook entries cannot be

deleted or edited.

• Press the

button to begin.

• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook Edit.⬙

• You will then be asked for the name of the phonebook

entry that you wish to edit.

• Next, choose the number designation (home, work,

cellular, or pager) that you wish to edit.

• When prompted, recite the new phone number for the

phonebook entry that you are editing.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

After you are finished editing an entry in the phonebook,
you will be given the opportunity to edit another entry in
the phonebook, call the number you just edited, or return
to the main menu.

⬙Phonebook Edit⬙ can be used to add another phone
number to a name entry that already exists in the
phonebook. For example, the entry John Doe may have a
cellular and a home number, but you can add ”John
Doe’s” work number later using the

⬙Phonebook Edit⬙

feature.

Delete Uconnect™ Phonebook Entry

NOTE:

Editing phonebook entries is recommended

when the vehicle is not in motion.

• Press the

button to begin.

• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook Delete.⬙

• After you enter the Phonebook Delete menu, you will

then be asked for the name of the entry that you wish
to delete. You can either say the name of a phonebook
entry that you wish to delete or you can say

⬙List

Names

⬙ to hear a list of the entries in the phonebook

from which you choose. To select one of the entries
from the list, press the

button while the

Uconnect™ Phone is playing the desired entry and say

⬙Delete.⬙

• After you enter the name, the Uconnect™ Phone will

ask you which designation you wish to delete: home,
work, cellular, pager, or all. Say the designation you
wish to delete.

• Note that only the phonebook entry in the current

language is deleted.

• Automatic downloaded phonebook entries cannot be

deleted or edited.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Delete/Erase “All” Uconnect™ Phonebook Entries

• Press the

button to begin.

• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook Erase All.⬙

• The Uconnect™ Phone will ask you to verify that you

wish to delete all the entries from the phonebook.

• After confirmation, the phonebook entries will be

deleted.

• Note that only the phonebook in the current language

is deleted.

• Automatic downloaded phonebook entries cannot be

deleted or edited.

List All Names in the Uconnect™ Phonebook

• Press the

button to begin.

• After the ⬙Ready⬙ prompt and the following beep, say

⬙Phonebook List Names.⬙

• The Uconnect™ Phone will play the names of all the

phonebook entries, including the downloaded phone-
book entries, if available.

• To call one of the names in the list, press the

button during the playing of the desired name, and
say

⬙Call.⬙

NOTE:

The user can also exercise

⬙Edit⬙ or ⬙Delete⬙

operations at this point.

• The Uconnect™ Phone will then prompt you as to the

number designation you wish to call.

• The selected number will be dialed.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Phone Call Features

The following features can be accessed through the
Uconnect™ Phone if the feature(s) are available on your
cellular service plan. For example, if your cellular service
plan provides three-way calling, this feature can be
accessed through the Uconnect™ Phone. Check with
your cellular service provider for the features that you
have.

Answer or Reject an Incoming Call - No Call
Currently in Progress
When you receive a call on your cellular phone, the
Uconnect™ Phone will interrupt the vehicle audio sys-
tem, if on, and will ask if you would like to answer the
call. Press the

button to accept the call. To reject the

call, press and hold the

button until you hear a

single beep, indicating that the incoming call was
rejected.

Answer or Reject an Incoming Call - Call
Currently in Progress
If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
call waiting that you normally hear when using your
cellular phone. Press the

button to place the current

call on hold and answer the incoming call.

NOTE:

The Uconnect™ Phone compatible phones in the

market today do not support rejecting an incoming call
when another call is in progress. Therefore, the user can
only answer an incoming call or ignore it.

Making a Second Call While Current Call is in
Progress
To make a second call while you are currently on a call,
press the

button and say

⬙Dial⬙ or ⬙Call⬙ followed

by the phone number or phonebook entry you wish to
call. The first call will be on hold while the second call is

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

in progress. To go back to the first call, refer to

⬙Toggling

Between Calls

⬙ in this section. To combine two calls, refer

⬙Conference Call⬙ in this section.

Place/Retrieve a Call From Hold
To put a call on hold, press the

button until you hear

a single beep. This indicates that the call is on hold. To
bring the call back from hold, press and hold the
button until you hear a single beep.

Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the

button until you hear a single beep, indicat-

ing that the active and hold status of the two calls have
switched. Only one call can be placed on hold at a time.

Conference Call
When two calls are in progress (one active and one on
hold), press and hold the

button until you hear a

double beep indicating that the two calls have been
joined into one conference call.

Three-Way Calling
To initiate three-way calling, press the

button

while a call is in progress, and make a second phone call,
as described under

⬙Making a Second Call While Current

Call is in Progress.

⬙ After the second call has established,

press and hold the

button until you hear a double

beep, indicating that the two calls have been joined into
one conference call.

Call Termination
To end a call in progress, momentarily press the
button. Only the active call(s) will be terminated and if
there is a call on hold, it will become the new active call.
If the active call is terminated by the phone far end, a call
on hold may not become active automatically. This is cell
phone-dependent. To bring the call back from hold, press
and hold the

button until you hear a single beep.

Redial

• Press the

button to begin.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• After the ⬙Ready⬙ prompt and the following beep, say

⬙Redial.⬙

• The Uconnect™ Phone will call the last number that

was dialed from your cellular phone.

NOTE:

This may not be the last number dialed from the

Uconnect™ Phone.

Call Continuation
Call continuation is the progression of a phone call on the
Uconnect™ Phone after the vehicle ignition key has been
switched to OFF. Call continuation functionality avail-
able on the vehicle can be any one of three types:

• After the ignition key is switched to OFF, a call can

continue on the Uconnect™ Phone either until the call
ends, or until the vehicle battery condition dictates
cessation of the call on the Uconnect™ Phone and
transfer of the call to the cellular phone.

• After the ignition key is switched to OFF, a call can

continue on the Uconnect™ Phone for a certain dura-
tion, after which the call is automatically transferred
from the Uconnect™ Phone to the cellular phone.

• An active call is automatically transferred to the

cellular phone after the ignition key is switched to
OFF.

Uconnect™ Phone Features

Language Selection
To change the language that the Uconnect™ Phone is
using:

• Press the

button to begin.

• After the ⬙Ready⬙ prompt and the following beep, say

the name of the language you wish to switch to
English, Espanol, or Francais.

100

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• Continue to follow the system prompts to complete

the language selection.

After selecting one of the languages, all prompts and
voice commands will be in that language.

NOTE:

After every Uconnect™ Phone language change

operation, only the language-specific 32-name phone-
book is usable. The paired phone name is not language-
specific and usable across all languages.

Emergency Assistance
If you are in an emergency and the cellular phone is
reachable:

• Pick up the phone and manually dial the emergency

number for your area.

If the phone is not reachable and the Uconnect™ Phone is
operational, you may reach the emergency number as
follows:

• Press the

button to begin.

• After the ⬙Ready⬙ prompt and the following beep, say

⬙Emergency⬙ and the Uconnect™ Phone will instruct
the paired cellular phone to call the emergency num-
ber. This feature is supported in the U.S., Canada, and
Mexico.

NOTE:

• The emergency number dialed is based on the country

where the vehicle is purchased (911 for the U.S. and
Canada and 060 for Mexico). The number dialed may
not be applicable with the available cellular service
and area.

• If supported, this number may be programmable on

some systems. To do this, press the

button and

say ‘Setup’, followed by ‘Emergency’.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

101

• The Uconnect™ Phone does slightly lower your

chances of successfully making a phone call as to that
for the cellular phone directly.

WARNING!

Your phone must be turned on and paired to the
Uconnect™ Phone System to allow use of this vehicle
feature in emergency situations, when the cellular
phone has network coverage and stays paired to the
Uconnect™ Phone System.

Towing Assistance
If you need towing assistance:

• Press the

button to begin.

• After the ⬙Ready⬙ prompt and the following beep, say

⬙Towing Assistance.⬙

NOTE:

• The towing assistance number dialed is based on the

country where the vehicle is purchased (1-800-528-
2069 for the U.S., 1-877-213-4525 for Canada, 55-14-
3454 for Mexico City and 1-800-712-3040 for outside
Mexico City in Mexico). Please refer to the 24-Hour

⬙Towing Assistance⬙ coverage details on the DVD in
the Warranty Information Booklet and the 24-Hour
Towing Assistance references.

• If supported, this number may be programmable on

some systems. To do this, press the

button and

say “Setup”, followed by “Towing Assistance”.

Paging
To learn how to page, refer to

⬙Working with Automated

Systems.

⬙ Paging works properly except for pagers of

certain companies, which time out a little too soon to
work properly with the Uconnect™ Phone.

102

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Voice Mail Calling
To learn how to access your voice mail, refer to

⬙Working

with Automated Systems.

⬙

Working with Automated Systems
This method is used in instances where one generally has
to press numbers on the cellular phone keypad while
navigating through an automated telephone system.

You can use your Uconnect™ Phone to access a voice
mail system or an automated service, such as a paging
service or automated customer service line. Some ser-
vices require immediate response selection. In some
instances, that may be too quick for use of the
Uconnect™ Phone.

When calling a number with your Uconnect™ Phone that
normally requires you to enter in a touch-tone sequence
on your cellular phone keypad, you can press the
button and say the sequence you wish to enter, followed
by the word

⬙Send.⬙ For example, if required to enter

your PIN followed with a pound, (3 7 4 6 #), you can
press the

button and say,

⬙3 7 4 6 # Send.⬙ Saying

a number, or sequence of numbers, followed by

⬙Send,⬙ is

also to be used for navigating through an automated
customer service center menu structure, and to leave a
number on a pager.

You can also send stored Uconnect™ phonebook entries
as tones for fast and easy access to voice mail and pager
entries. To use this feature, dial the number you wish to
call and then press the

button and say, “Send.” The

system will prompt you to enter the name or number and
say the name of the phonebook entry you wish to send.
The Uconnect™ Phone will then send the corresponding
phone number associated with the phonebook entry, as
tones over the phone.

NOTE:

• You may not hear all of the tones due to cellular phone

network configurations. This is normal.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

103

• Some paging and voice mail systems have system time

out settings that are too short and may not allow the
use of this feature.

Barge In - Overriding Prompts
The “Voice Command” button can be used when you
wish to skip part of a prompt and issue your voice
command immediately. For example, if a prompt is
asking

⬙Would you like to pair a phone, clear a...,⬙ you

could press the

button and say,

⬙Pair a Phone⬙ to

select that option without having to listen to the rest of
the voice prompt.

Turning Confirmation Prompts ON/OFF
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the Uconnect™
Phone will not repeat a phone number before you dial it).

• Press the

button to begin.

• After the ⬙Ready⬙ prompt and the following beep, say

⬙Setup Confirmations.⬙ The Uconnect™ Phone will
play the current confirmation prompt status and you
will be given the choice to change it.

Phone and Network Status Indicators
If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your cellular phone, the Uconnect™ Phone will provide
notification to inform you of your phone and network
status when you are attempting to make a phone call
using Uconnect™ Phone. The status is given for roaming,
network signal strength, phone battery strength, etc.

Dialing Using the Cellular Phone Keypad
You can dial a phone number with your cellular phone
keypad and still use the Uconnect™ Phone (while dialing
via the cellular phone keypad, the user must exercise
caution and take precautionary safety measures). By
dialing a number with your paired Bluetooth

威 cellular

104

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

phone, the audio will be played through your vehicle’s
audio system. The Uconnect™ Phone will work the same
as if you dial the number using Voice Command.

NOTE:

Certain brands of cellular phones do not send

the dial ring to the Uconnect™ Phone to play it on the
vehicle audio system, so you will not hear it. Under this
situation, after successfully dialing a number the user
may feel that the call did not go through even though the
call is in progress. Once your call is answered, you will
hear the audio.

Mute/Un-Mute (Mute OFF)
When you mute the Uconnect™ Phone, you will still be
able to hear the conversation coming from the other
party, but the other party will not be able to hear you. In
order to mute the Uconnect™ Phone:

• Press the

button.

• Following the beep, say ⬙Mute.⬙

In order to un-mute the Uconnect™ Phone:

• Press the

button.

• Following the beep, say ⬙Mute off.⬙

Advanced Phone Connectivity

Transfer Call to and from Cellular Phone
The Uconnect™ Phone allows ongoing calls to be trans-
ferred from your cellular phone to the Uconnect™ Phone
without terminating the call. To transfer an ongoing call
from your Uconnect™ Phone paired cellular phone to the
Uconnect™ Phone or vice versa, press the

button

and say

⬙Transfer Call.⬙

Connect or Disconnect Link Between the
Uconnect™ Phone and Cellular Phone
Your cellular phone can be paired with many different
electronic devices, but can only be actively

⬙connected⬙

with one electronic device at a time.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

105

If you would like to connect or disconnect the Bluetooth

威

connection between a Uconnect™ Phone paired cellular
phone and the Uconnect™ Phone, follow the instructions
described in your cellular phone User’s Manual.

List Paired Cellular Phone Names

• Press the

button to begin.

• After the “Ready” prompt and the following beep, say

“Setup Phone Pairing.”

• When prompted, say ⬙List Phones.⬙
• The Uconnect™ Phone will play the phone names of

all paired cellular phones in order from the highest to
the lowest priority. To “select” or “delete” a paired
phone being announced, press the

button and

say “Select” or “Delete.” Also, see the next two sec-
tions for an alternate way to “select” or “delete” a
paired phone.

Select Another Cellular Phone
This feature allows you to select and start using another
phone paired with the Uconnect™ Phone.

• Press the

button to begin.

• After the ⬙Ready⬙ prompt and the following beep, say

⬙Setup Select Phone⬙ and follow the prompts.

• You can also press the

button at any time while

the list is being played, and then choose the phone that
you wish to select.

• The selected phone will be used for the next phone

call. If the selected phone is not available, the
Uconnect™ Phone will return to using the highest
priority phone present in or near (approximately
within 30 ft (9 m)) the vehicle.

Delete Uconnect™ Phone Paired Cellular Phones

• Press the

button to begin.

106

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

• After the ⬙Ready⬙ prompt and the following beep, say

⬙Setup Phone Pairing.⬙

• At the next prompt, say ⬙Delete⬙ and follow the

prompts.

• You can also press the

button at any time while

the list is being played, and then choose the phone you
wish to delete.

Things You Should Know About Your Uconnect™
Phone

Uconnect™ Phone Tutorial
To hear a brief tutorial of the system features, press the

button and say “Uconnect™ Tutorial.”

Voice Training
For users experiencing difficulty with the system recog-
nizing their voice commands or numbers, the Uconnect™

Phone Voice Training feature may be used. To enter this
training mode, follow one of the two following proce-
dures:

From outside the Uconnect™ Phone mode (e.g., from
radio mode):

• Press and hold the

button for five seconds until

the session begins, or,

• Press the

button and say the

⬙Setup, Voice

Training

⬙ command.

Repeat the words and phrases when prompted by the
Uconnect™ Phone. For best results, the Voice Training
session should be completed when the vehicle is parked
with the engine running, all windows closed, and the
blower fan switched off.

This procedure may be repeated with a new user. The
system will adapt to the last trained voice only.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

107

Dodge Charger SRT8 (2010 year). Manual - part 6