|
|
DRIVER SEAT BELT TENSIONER CIRCUIT OPEN (CONTINUED) 4. CHECK (R53) DRIVER SEAT BELT TENSIONER LINE 2 CIRCUIT FOR AN OPEN Measure the resistance of the (R53) Driver Seat Belt Tensioner Line 2 Is the resistance below 1.0 ohm? Yes >> Go To 5 No >> Repair the (R53) Driver Seat Belt Tensioner Line 2 circuit for and open. Perform ORC VERIFICATION TEST - VER 1 5. REPLACE THE ORC WARNING: If the Occupant Restraint Controller (ORC) is dropped at any time, it must be replaced. Failure to NOTE: When reconnecting airbag system components the Ignition must be turned off and the Battery must Repair Replace the ORC in accordance with Service Information. Perform ORC VERIFICATION TEST - VER 1 8O - 18 RESTRAINTS - ELECTRICAL DIAGNOSTICS DR/DH |