|
|
TEST ACTION APPLICABILITY 3 With the DRBIII t, record the EATX EVENT DATA to help identify the conditions in which the DTC was set. t, erase Transmission DTCs. NOTE: To erase EATX EVENT DATA information, a BATTERY DISCONNECT t, read Transmission DTCs. Did the DTC P0124 THROTTLE POSITION SENSOR INTERMITTENT, reset? All Yes → Go To 4 No → Go To 6 4 Ignition On, Engine Not Running. t, under Transmission Sensors, monitor the TPS voltage in the following step. All Yes → Go To 5 No → Replace the Throttle Position Sensor per the Service Information. Perform 40/41TE (NGC) TRANSMISSION VERIFICATION 5 NOTE: Due to the integration of the Powertrain and Transmission Control All Repair Replace the Powertrain Control Module per the Service Informa- t PERFORM QUICK LEARN. Perform 40/41TE (NGC) TRANSMISSION VERIFICATION 6 The conditions necessary to set this DTC are not present at this time. t, check the EATX EVENT DATA to help identify the conditions in which the DTC was set. All Yes → Repair as necessary. Perform 40/41TE (NGC) TRANSMISSION VERIFICATION No → Test Complete. 34 TRANSMISSION - NGC P0124-THROTTLE POSITION SENSOR/APPS INTERMITTENT — Continued |