|
|
Diagnostic Test 1) PCM FROM ANOTHER VEHICLE INSTALLED Has another PCM been installed? Yes Replace the PCM in accordance with the service information. Perform BODY VERIFICATION TEST - VER 1 . No Go to 2). 2) OTHER CAN-C MODULES SET VIN MISMATCH Is VIN Mismatch DTC set in other CAN-C modules? Yes Replace the PCM in accordance with the service information. Perform BODY VERIFICATION TEST - VER 1 . No Replace the TIPM in accordance with the service information. Perform BODY VERIFICATION TEST - VER 1 . B222C-VEHICLE CONFIGURATION NOT PROGRAMMED For complete wiring diagrams refer to SYSTEM WIRING DIAGRAMS article. When Monitored: Continuously Set Condition: The TIPM is not configured for the vehicle. Possible Causes PCM FROM ANOTHER VEHICLE INSTALLED NOTE: This DTC is set when a PCM from another vehicle is installed into the
2007 Dodge Nitro R/T 2007 ENGINE Ignition Control - Electrical Diagnostics - Nitro
|