Dodge Nitro. Manual - part 447

 

  Index      Dodge     Dodge Nitro - service repair manual 2007 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  445  446  447  448   ..

 

 

Dodge Nitro. Manual - part 447

 

 

service. Disconnect and isolate the battery negative (ground) cable, then 
wait two minutes for the system capacitor to discharge before performing 
further diagnosis or service. This is the only sure way to disable the 
supplemental restraint system. Failure to take the proper precautions 
could result in accidental airbag deployment.

WARNING:

To avoid serious or fatal injury on vehicles equipped with airbags, before 
performing any welding operations disconnect and isolate the battery 
negative (ground) cable and disconnect all wire harness connectors from 
the Occupant Restraint Controller (ORC). Failure to take the proper 
precautions could result in accidental airbag deployment and other 
possible damage to the supplemental restraint system circuits and 
components.

WARNING:

To avoid serious or fatal injury, do not attempt to dismantle an airbag unit 
or tamper with its inflator. Do not puncture, incinerate, or bring into 
contact with electricity. Do not store at temperatures exceeding 93°C 
(200°F). An airbag inflator unit may contain sodium azide and potassium 
nitrate. These materials are poisonous and extremely flammable. Contact 
with acid, water, or heavy metals may produce harmful and irritating 
gases (sodium hydroxide is formed in the presence of moisture) or 
combustible compounds. An airbag inflator unit may also contain a gas 
canister pressurized to over 17.24 kPa (2500 psi).

WARNING:

To avoid serious or fatal injury when handling a seat belt tensioner 
retractor, proper care should be exercised to keep fingers out from under 
the retractor cover and away from the seat belt webbing where it exits 
from the retractor cover.

WARNING:

To avoid serious or fatal injury, replace all restraint system components 
only with parts specified in the DaimlerChrysler Mopar® Parts Catalog. 
Substitute parts may appear interchangeable, but internal differences may 
result in inferior occupant protection.

WARNING:

To avoid serious or fatal injury, the fasteners, screws, and bolts originally 
used for the restraint system components must never be replaced with 
any substitutes. These fasteners have special coatings and are 
specifically designed for the restraint system. Any time a new fastener is 
needed, replace it with the correct fasteners provided in the service 
package or specified in the DaimlerChrysler Mopar® Parts Catalog.

WARNING:

To avoid serious or fatal injury when a steering column has an airbag unit 
attached, never place the column on the floor or any other surface with 
the steering wheel or airbag unit face down.

 

2007 Dodge Nitro R/T 

2007 ACCESSORIES AND EQUIPMENT Body - Nitro

  

SEAT - FRONT 

DESCRIPTION 

DESCRIPTION 

Fig. 447: Drivers Seat 2 Way Assembly 
Courtesy of CHRYSLER LLC 

1 - BAG, BSR

20 - RECLINER, HANDLE ASSEMBLY

2 - CUSHION, BACK

21 - SCREW

3 - HEADREST, GUIDE WITHOUT BUTTON

22 - SCREW

4 - HEADREST, ASSEMBLY

23 - SHIELD

5 - BOLT, SEAT BELT 47.5 N.m (35 ft. lbs.)

24 - SHIELD

6 - HEADREST, GUIDE WITH LOCK AND 
BUTTON

25 - SHIELD

7 - CUSHION, SEAT

26 - RIVET

8 - PRETENSIONER, ASSEMBLY

27 - WIRE, SHIELD ATTACHMENT

9 - SHIELD, ASSEMBLY

28 - HARNESS, ASSEMBLY

10 - SCREW

29 - RISER, LH OUTBOARD

11 - SHIELD

30 - NUT 27.5 N.m (20 ft. lbs.)

12 - FRAME, SEAT

31 - RISER, LH INBOARD

13 - SCREW, M10 47.5 N.m (35 ft. lbs.)

32 - COVER, SEAT

 

2007 Dodge Nitro R/T 

2007 ACCESSORIES AND EQUIPMENT Body - Nitro

  

Fig. 448: Drivers Seat 6 Way Assembly 
Courtesy of CHRYSLER LLC 

14 - FRAME, SEAT BACK

33 - ELEMENT, HEATED SEAT

15 - PLATE, ROUTING

34 - ELEMENT, HEATED SEAT BACK

16 - PIN, PUSH

35 - COVER, SEAT BACK

17 - SCREW

36 - COVER, HEAD REST

18 - SHIELD

37 - SENSOR, SEAT TRACK POSITION

19 - SCREW, M10 47.5 N.m (35 ft. lbs.)

-

1 - BAG, BSR

22 - PLATE, ROUTING

2 - CUSHION, BACK

23 - SCREW

3 - HEADREST, GUIDE WITHOUT BUTTON

24 - RIVET

4 - HEADREST, ASSEMBLY

25 - SHIELD

5 - HEADREST, GUIDE WITH LOCK

26 - SCREW

6 - BOLT, SEAT BELT 47.5 N.m (35 ft. lbs.)

27 - SHIELD

7 - CUSHION, SEAT

28 - SCREW

8 - PRETENSIONER, ASSEMBLY

29 - SHIELD, CLOSEOUT

9 - SHIELD, ASSEMBLY

30 - SHIELD, POWER SWITCH

10 - FRAME, SEAT

31 - SHIELD, POWER SEAT

11 - SCREW, M10 47.5 N.m (35 ft. lbs.)

32 - WIRE, SHIELD ATTACHMENT

12 - SHIELD

33 - HARNESS, 6 WAY POWER

 

2007 Dodge Nitro R/T 

2007 ACCESSORIES AND EQUIPMENT Body - Nitro

  

Fig. 449: Passenger Seat Domestic Assembly 
Courtesy of CHRYSLER LLC 

13 - SCREW

34- RISER, LH OUTBOARD

14 - RISER, LH INBOARD

35 - NUT 27.5 N.m (20 ft. lbs.)

15 - SCREW

36 - COVER, SEAT

16 - FRAME, SEAT BACK

37 - ELEMENT, HEATED SEAT BACK

17 - PIN, PUSH

38 - ELEMENT, HEATED SEAT

18 - SHIELD

39 - COVER, SEAT BACK

19 - SHIELD

40 - COVER, HEAD REST

20 - RECLINER, HANDLE ASSEMBLY

41 - SENSOR, SEAT TRACK POSITION

21 - SCREW, M10 47.5 N.m (35 ft. lbs.)

-

1 - BAG, BSR

26 - BOLT, SEAT BELT

2 - HEADREST, GUIDE WITHOUT BUTTON

27 - SCREW

3 - HEADREST, ASSEMBLY

28 - CABLE, RELEASE

4 - HEADREST, GUIDE WITH LOCK

29 - FRAME, SEAT

5 - SHIELD, CLOSEOUT

30 - SENSOR, SEAT TRACK POSITION

6 - SCREW

31 - HARNESS, ASSEMBLY

7 - SHIELD, ASSEMBLY

32 - GAGE, STRAIN TI

8 - SCREW

33 - NUT 27.5 N.m (20 ft. lbs.)

9 - RIVET

34 - RISER

 

2007 Dodge Nitro R/T 

2007 ACCESSORIES AND EQUIPMENT Body - Nitro

  

 

 

 

 

 

 

 

Content   ..  445  446  447  448   ..