|
|
Content .. 1179 1180 1181 1182 ..
© 200423 3-1 Rear axle TECHNICAL DATA ΧΦ85 series 0 3. REAR AXLE 3.1 TIGHTENING TORQUES The tightening torques stated in this paragraph When attachment bolts and nuts are replaced, it M24 U-bolt nut, property class 8 (1) Evenly tighten the two U-bolt nuts alternately. M24 U-bolt nut, property class 10 (1) Evenly tighten the two U-bolt nuts alternately. M22 U-bolt nut, property class 10 (1) Evenly tighten the two U-bolt nuts alternately. Filler and drain plugs/hub plugs (Torx wrench) 85 Nm If flanged nut 740 Nm ≥ 55 Nm If yellow zinc plated hexagonal nut 615 Nm ≥ 50 Nm If flanged nut 880 Nm ≥ 60 Nm If yellow zinc plated hexagonal nut 615 Nm ≥ 50 Nm If flanged nut 700 Nm ≥ 50 Nm If yellow zinc plated hexagonal nut 530 Nm ≥ 40 Nm |