|
|
Content .. 1022 1023 1024 1025 ..
© 200424 3-7 Removal and installation SINGLE REAR AXLE 1339 ΧΦ65/75/85 series 8 3 10. Tighten the hub nut (1) using the hub nut wrench (A), which is part of the special tool set (DAF no. 1329496). Tighten the hub nut (1) in the specified manner using a torque amplifier, see "Technical data". 11. Press the wheel speed sensor (1) up against the sensor ring (2). While the vehicle is being driven, the air gap between the sensor and the sensor ring is adjusted automatically. 12. Fit the axle shaft. 13. Fit the brake calliper. 14. Put the wheels back on. A A8 00 405 1 2 A8 00 342 |