DAF CF65, CF75, CF85 Series . Manual - part 59
©
1-5
ZF intarder EST42 fault codes
ZF INTARDER EST42
DAVIE XD diagnostics manual
15
46-15
No CAN communication possible between any
vehicle systems due to problems with the V-CAN:
-
interruption on pin 49 or 22 or
-
defective CAN terminating resistance
-
Normal braking effect of the intarder if the
steering column switch is in position 1.
-
Reduced braking effect of the intarder if the
steering column switch is in position 2 or 3.
(Current through proportional valve is
restricted to 250 mA max.)
-
No speed indication on DIP if V-constant
function is activated
-
No V-constant function possible
47-19
Incorrect or missing engine speed signal via
message on CAN network due to:
-
interruption on pin 22
-
short circuit to earth on pin 49
-
short circuit to supply on pin 22 and/or 49
-
defective CAN terminating resistance
-
incorrect message from UPEC unit
-
Maximum braking effect of intarder
restricted to 350 kW
-
AS Tronic gearbox does not shift down
automatically when the intarder is activated.
48-19
Incorrect or missing vehicle speed signal via
message on CAN network due to:
-
interruption on pin 22
-
short circuit to earth on pin 49
-
short circuit to supply on pin 22 and/or 49
-
defective CAN terminating resistance
-
incorrect message from MTCO unit
-
Normal braking effect of the intarder if the
steering column switch is in position 1.
-
Reduced braking effect of the intarder if the
steering column switch is in position 2 or 3.
(Current through proportional valve is
restricted to 250 mA max.)
-
No speed indication on DIP if V-constant
function is activated
-
No V-constant function possible
-
Intarder does not function during third brake
integration braking
49-19
Incorrect or missing cruise control speed signal
via message on CAN network due to:
-
interruption on pin 22
-
short circuit to earth on pin 49
-
short circuit to supply on pin 22 and/or 49
-
defective CAN terminating resistance
-
incorrect message from UPEC unit
-
V-constant function not available
51-19
Incorrect or missing current intarder braking
torque signal via message on CAN network due
to:
-
interruption on pin 22
-
short circuit to earth on pin 49
-
short circuit to supply on pin 22 and/or 49
-
defective CAN terminating resistance
-
incorrect message from UPEC unit
-
If the engine brake is switched on by foot
while the V-constant function is activated,
the intarder will not be automatically set to
the last selected current braking torque once
the engine brake is switched off.
64-19
Incorrect or missing CAN extension box signal via
message on CAN network due to:
-
interruption on pin 22
-
short circuit to earth on pin 49
-
short circuit to supply on pin 22 and/or 49
-
defective CAN terminating resistance
-
incorrect message from CAN extension box
-
No intarder braking effect possible via CAN
extension box
71-13
No supply voltage before ignition for intarder unit
(D902) due to:
-
short circuit to earth, interruption on pin 54 or
55
-
defective fuse E199
-
No noticeable system limitation
Fault code
Fault code description with possible cause
Symptom