|
|
• When Monitored: • With the ignition on. • Set Condition: • When the FCM detects a short/HIGH condition. Possible Causes INTEGRATED POWER MODULE Diagnostic Test 1. INTEGRATED POWER MODULE Turn the ignition off. Replace the Wiper ON/OFF relay with and known good relay. With the Scan Tool, clear all FCM DTC’s. Turn the Wipers ON then OFF. With the Scan Tool, read the Wiper DTC’s. Does the Scan Tool read: B2314-WIPER ON/OFF CONTROL CIRCUIT HIGH? Yes >> Replace the Integrated Power Module in accordance with the service information. Perform the BODY VERIFICATION TEST — VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CON- No >> Test complete. Perform the BODY VERIFICATION TEST — VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CON- 8R - 12 WIPERS/WASHERS - ELECTRICAL DIAGNOSTICS LX |