|
|
4. INTERMITTENT Turn the ignition off. NOTE: Check for the following conditions: • Visually inspect the related wiring harness. Look for any chafed, pierced, pinched, or partially broken • Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded • Refer to any Technical Service Bulletins (TSB) that may apply. Were any problems found? Yes >> Repair wiring harness/connectors as necessary. Perform SKREEM VERIFICATION TEST No >> Test Complete. 8Q - 16 VEHICLE THEFT SECURITY - ELECTRICAL DIAGNOSTICS LX |