Chevrolet Silverado / GMC Sierra. Manual - part 641
Fig. 92: View Of Cooling Fan Pulley
Courtesy of GENERAL MOTORS CORP.
4. Install the cooling fan pulley.
5. Install the cooling fan pulley bolts and nuts.
Tighten: Tighten the cooling fan pulley bolts and nuts to 41 N.m (30 lb ft).
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 93: View Of Camshaft Position Sensor Electrical Connector
Courtesy of GENERAL MOTORS CORP.
6. Connect the camshaft position sensor connector.
ENGINE REMOVAL FROM STAND
Tools Required
J 36857 Engine Lift Bracket. See Special Tools .
Removal
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 94: View Of J 36857 Installation Positions
Courtesy of GENERAL MOTORS CORP.
1. Bolt J 36857 to the ends of the cylinder heads. See Special Tools .
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 95: Mounting Engine Block To Suitable Engine Stand
Courtesy of GENERAL MOTORS CORP.
2. Lift the engine and the engine stand with a suitable hoist.
3. Remove the engine stand from the engine adapter.
4. Lower the engine to the floor. Support the engine with blocks.
5. Remove the engine adapter.
ENGINE FLYWHEEL HOUSING INSTALLATION
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado