|
|
Content .. 2627 2628 2629 2630 ..
of the flank can help to remove some of the corrosion. 25. If corrosion is severe, replace the affected components. Corrosion is caused by the following conditions: Water or slat water entering the transmission Condensation forming under unfavorable operating conditions Oil aging and the decomposition of corrosion inhibitors
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Manual Transmission - Tremec 5-Speed (TZ0)
Fig. 128: Inspect Reverse Idler Gear For Brinelling 26. Inspect the reverse idler gear for brinelling. This type of damage occurs on the roller races of the idler gear. This type of damage is
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Manual Transmission - Tremec 5-Speed (TZ0)
performs a supporting function over a long period of time, there is not movement between 27. Replace any gears showing brinelling. Fig. 129: Inspect Mainshaft Bearing Surfaces 28. Inspect the mainshaft bearing surfaces for the following conditions: Wear Lack of lubricant Debris embedded in the oil grooves 29. Inspect the main shaft splines for wear or damage. 30. Replace the main shaft if any of the above conditions are found.
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Manual Transmission - Tremec 5-Speed (TZ0)
BEARINGS AND SPACERS CLEANING AND INSPECTION Fig. 130: Bearings 1. Clean all bearing components in a suitable solvent and air dry. 2. Inspect the bearings and journals for roughness and unusual wear or damage. NOTE: Do not allow the bearings to spin. Turn them slowly by hand.
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Manual Transmission - Tremec 5-Speed (TZ0)
Content .. 2627 2628 2629 2630 ..
|
|
|