|
|
Content .. 2189 2190 2191 2192 ..
Fig. 22: View Of Oil Filter Fitting 1. Install the oil filter fitting (438). Tighten: Tighten the oil filter fitting to 55 N.m (40 lb ft). NOTE: Refer to Fastener Notice .
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 23: View Of Engine Oil Filter 2. Lubricate the oil filter seal with clean engine oil. 3. Install the oil filter (437). Tighten: Tighten the oil filter to 30 N.m (22 lb ft). VALVE LIFTER INSTALLATION (RPO LY2/LY6/L92)
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 24: Valve Lifter Guides & Bolts 1. Lubricate the valve lifters (209) and engine block valve lifter bores with clean engine oil. 2. Insert the valve lifters into the lifter guides (210). IMPORTANT: When using the valve lifters again, install the lifters to If camshaft replacement is required, the valve lifters
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Align the flat area on the top of the lifter with the flat area in the lifter guide bore. Push the Fig. 25: Valve Lifter Guides, Cylinder Head & Bolts 3. Install the valve lifters and guide assembly (210) to the engine block. NOTE: Refer to Fastener Notice .
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 2189 2190 2191 2192 ..
|
|
|