|
|
Content .. 2177 2178 2179 2180 ..
1. Inspect the rear housing to identify for alignment tabs (1). First design rear housings do not have alignment tabs Second design rear housings have alignment tabs for
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 226: View Of Engine Block Rear Oil Gallery Plug 2. Inspect the rear oil gallery plug for proper installation. Fig. 227: View Of Rear Housing Gasket, Rear Housing With Seal And Bolts 3. Install the J 41479-2A cone and bolts onto the rear of the crankshaft. 4. Tighten the bolts until snug. Do not overtighten. 5. Install the rear housing gasket (1), rear housing with seal (2), and bolts (3). 6. Tighten the bolts finger tight. Do not overtighten. 7. Remove the J 41479-2A and bolts.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 228: View Of J 41480 Installed To Engine Block 8. Install the J 41480 and bolts. See Special Tools . Tighten: NOTE: Refer to Fastener Notice .
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 2177 2178 2179 2180 ..
|
|
|