|
|
Tighten: Tighten the oil pump drive shaft clamp bolt to 25 N.m (18 lb ft). Fig. 708: View Of Ignition Coil Bracket & Bolts 15. If required, install the ignition coil bracket and bolts. Tighten: Tighten the ignition coil bracket bolts to 12 N.m (106 lb in).
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
Fig. 709: View Of Ignition Coil & Bolts 16. Install the ignition coil and ignition coil bolts. Tighten: Tighten the ignition coil bolts to 12 N.m (106 lb in). VALVE ROCKER ARM COVER INSTALLATION - LEFT SIDE
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
Fig. 710: View Of Rocker Arm Cover And Gasket 1. Install the NEW valve rocker arm cover gasket into the groove of the valve rocker arm cover. 2. Install the NEW valve rocker arm cover bolt grommets into the valve rocker arm cover. IMPORTANT: Do not reuse the valve cover gasket or the valve rocker arm cover bolt grommets.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
|
|
|