|
|
Content .. 1658 1659 1660 1661 ..
Fig. 182: Removing/Installing Engine Coolant Air Bleed Pipe 2. Install the coolant air bleed pipe (307) and seals (308) onto the cylinder heads. 3. Install the coolant air bleed pipe bolts (309). Tighten: Tighten the bolts to 12 N.m (106 lb in). NOTE: Refer to Fastener Notice .
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 183: Removing/Installing Coolant Air Bleed Cover Bolts 4. Install the coolant air bleed covers (313) and seals (308), if required. 5. Install the coolant air bleed cover bolts (312), if required. Tighten: Tighten the bolts to 12 N.m (106 lb in).
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 184: View Of Radiator Vent Inlet Hose & Clamps 6. Install the radiator vent inlet hose (2) to the coolant air bleed pipe fitting. 7. Position the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting. 8. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement . 9. Fill the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) or Cooling System Draining and Filling (Static Fill). 10. If the rear coolant air bleed covers were replaced, install the intake manifold. Refer to Intake Manifold Replacement (L92 - First Design) or Intake Manifold Replacement
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
(L92 - Second Design) or Intake Manifold Replacement (LY2 and LY6) or Intake WATER PUMP REPLACEMENT (LU3) Tools Required J 41240 Fan Clutch Remover and Installer Removal Procedure Fig. 185: View Of Radiator Outlet Hose
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 1658 1659 1660 1661 ..
|
|
|