|
|
Content .. 1655 1656 1657 1658 ..
Second Design) or Intake Manifold Replacement (LY2 and LY6) or Intake Manifold 2. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement . 3. Drain the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) or Cooling System Draining and Filling (Static Fill). 4. Reposition the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting. 5. Remove the radiator vent inlet hose (2) from the coolant air bleed pipe fitting.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 170: Engine Coolant Air Bleed Pipe 6. Remove the coolant air bleed pipe bolts (309) (intake manifold shown removed for clarity). 7. Remove the coolant air bleed pipe (307) and seals (308). Fig. 171: Engine Coolant Air Bleed Cover Bolts
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
8. Remove the coolant air bleed cover bolts (312), if required. 9. Remove the coolant air bleed covers (313) and seals (308), if required. Fig. 172: View Of Coolant Air Bleed Pipe Seal 10. Remove the seals (308) from the coolant air bleed pipe and/or covers. 11. Discard the seals.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Installation Procedure Fig. 173: View Of Coolant Air Bleed Pipe Seal 1. Install the seals onto the coolant air bleed pipe and/or covers. IMPORTANT: Position the O-ring seal (308) onto the nipple portion of the pipe.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 1655 1656 1657 1658 ..
|
|
|