|
|
Fig. 180: View Of Engine Coolant Temperature Sensor 11. Install the ECT sensor. If reusing the old sensor, apply sealant to the threads. Refer to Sealers, Adhesives, and Lubricants for the correct part number. Tighten: Tighten the sensor to 20 N.m (15 lb ft).
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
Fig. 181: View Of Ground Strap And CMP & Fuel Pump/Oil Pressure Sensor 12. Position the ground strap (5) and harness ground (4). 13. Install the harness ground bolt. Tighten: Tighten the bolt to 16 N.m (12 lb ft).
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
Fig. 182: Locating Power Steering Pump Mounting Bracket Stud 14. Install the P/S pump bracket stud. Tighten: Tighten the stud to 20 N.m (15 lb ft).
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
Fig. 183: View Of Power Steering Pump Bracket 15. Slide the P/S pump bracket rearward. 16. Install the bolts and nuts for the P/S pump bracket. 17. Install the P/S pump rear bracket front nut. 18. Tighten the P/S pump rear bracket nut. Tighten: Tighten the bolts and nuts to 41 N.m (30 lb ft).
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
|
|
|