Content .. 70 71 72 73 ..

Chery QQ6 (S21) / S12LHD. Manual - part 72

Mileage (Km)

Maintenance Item

5000

15000

30000

Engine oil: Replace it

★

Oil cleaner: Replace it

★

Transmission oil: Check the oil level, quality, color, and refill it, if necessary

★

Engine: Check the leakage (engine oil, antifreeze fluid, fuel, A/C system, etc)

★

Battery: Check the electrolyte level, and refill the distilled water if necessary

(equipped with the maintenance-free battery)

★

Timing belt: Check the wear and tension, and adjust or replace it if necessary

★

Engine hood hinge and lock body: Lubricate it

★

Door hinge and door stopper: Lubricate it

★

Spark plug: Check it, and replace it, if necessary

★

Air cleaner: Clean its housing, clear the element, and replace its element, if necessary

★

A/C filter: Check its cleanness, and replace it, if necessary

★

Ignition timing: Check it

★

Fuel cleaner: Replace it

★

Wedge-shaped belt: Check its tension, and adjust or replace it, if necessary

★

Transmission: Check its leakage or damage

★

Dust cap of constant velocity universal joint: Check its damage

★

Steering tie rod end: Check its free play and the damage of dust cap

★

Protective sleeve of steering universal joint assy: Check its dislocation or damage

★

Hand brake: Check its travel and adjust it, if necessary

★

Brake lining/shoe: Check its thickness, and replace it, if necessary

★

Brake disc/drum: Check its working condition, damage, and replace it, if necessary

★

Vehicle bottom protector: Visually check its damage

★

Seat belt: Check its damage

★

Toe-in value, camber angle: Check it, and adjust it, if necessary

★

Ball pin: Check its clearance

★

Rubber rear axle hingle: Check its damage

★

Steering knuckle/front wheel bearing: Check the looseness of connection, abnormal

sound

★

Engine oil pan bolt: Check its looseness, and tighten it if necessary

★

Control arm rubber sleeve: Check its damage

★

Brake hose: Check its ageing, damage

★

Brake pipe: Check its damage, corrosion and the leakage at any joint

★

Suspension components: Check its abnormal looseness or friction, damage, and

normal working

★

All joints of fuel system: Check its ageing, damange, abnormal looseness or friction

★

Mileage (Km)

Maintenance Item

5000

15000

30000

Exhaust system: Check its leakage and damage, adjust or replace it, if necessary

★

Steering system: Check the power steering fluid level, whether the clearance between

the racks of steering wheel’s gear is proper, the connection condition of all linkages,

whether the system works normally, and repair or replace it, if necessary

★

Cooling system: Check the antifreeze fluid level, the status of all connecting pipes,

leakage, and replace it, if necessary

★

Brake system: Check the brake fluid level, the status of all connecting pipes, damage

and leakage, the working condition of the system, and repair or replace it, if

necessary

★

A/C system: Check whether its pressure is normal, damaged, has abnormal sound,

odor, and works normally

★

Tire (including spare tire): Check the depth of tire pattern, regulate the air pressure of

tire, and check the tightening torque of wheel bolt.

★

Tire position change

★

Chassis and body connecting bolt: Check its looseness, and tighten it, if necessary

★

Wheel: Check its looseness

★

Engine idling check: Check whether the engine working condition of the engine,

parameters of electronic fuel injector, and its exhaust are normal when the engine

operates at the idle speed, adjust it, if necessary

★

Trail driving: Check whether the functions of all mechanisms are normal or not,

adjust it, if necessary

★

Note: For the manual transmission, the transmission gear oil shall be replaced every one-year of traveling or the

mileage of 30,000 KM, and the brake fluid must be replaced every two-year of travelling or the mileage of 50,000

KM.

2. Regular Maintenance Process

2.1. Standard first maintenance (5,000 KM) work procedure

2.1.1. Receive the vehicle to be maintained, wear the “four-piece series” (seat cover, steering

wheel cover, shift lever cover, driver’s foot pad) on the vehicle, drive the vehicle to the

lifting jack, and support the vehicle;

2.1.2. Prepare for the related tools and special devices;

2.1.3. Wear the left and right fenders protective covers and front protective covers on the vehicle

to be maintained;

2.1.4. Replace the engine oil, and oil cleaner (refer to the replacement above-mentioned in this

manual);

2.1.5. Check transmission oil: Check the leakage of transmission oil viewing from the engine

compartment; and then lift up the vehicle and check the leakage of transmission oil viewing

from the bottom of vehicle;

2.1.6. Check the oil/fluid: Check the levels of brake fluid, antifreeze fluid, glass cleaning fluid

and power steering oil, and the leakage of the related pipelines;

2.1.7. Check the door lock, hinge and stopper: Check the working condition of all door locks,

hinges and stoppers, and appropriately add the lubrication oil if there is abnormal sound or

the resistance is big;

2.1.8. Check the air cleaner: Clean the element (with the high-pressure air), and replace it, if

necessary;

2.1.9. Check the dislocation or damage of the dust cap of constant velocity joint;

2.1.10. Check the damage of steering tie rod end and its dust cap;

2.1.11. Check the thickness of brake lining/shoe, and replace it, if necessary. The standard

thickness of front brake lining is 10 mm, with the serviceability limit of 3 mm, and the

remaining thickness while the brake lining thickness limit shall not be less than 3 mm; and

the standard thickness of rear brake lining is 5 mm, with the serviceability limit of 1 mm,

and the remaining thickness while the brake lining thickness limit shall not be less than 1

mm;

2.1.12. Check the suspension components: Check its abnormal looseness or friction, damage, and

the working condition;

2.1.13. Check the brake system: Check the brake fluid level, the status of all connecting pipes,

leakage and damage, the working condition of the system, and repair or replace it, if

necessary;

2.1.14. Check the A/C system: clean the element (with the high-pressure air), check its pressure

(it is different according to the various working conditions, etc, and the reference value

while idling is:low pressure: 2.5 - 3.0 Bar; high pressure: 15 - 17 Bar), the leakage,

abnormal sound, odor, and the working condition;

2.1.15. Check tire (including spare tire): Check the depth of tire pattern, which the depth of tire

pattern shall not be less than 1.6 mm; regulate the air pressure of tire: 230kPa for front

wheel, 210 kPa for rear wheel, and 230 kPa for spare tire; and check the wheel bolt

tightening torque (110±10Nm);

2.1.16. Check the chassis bolt: Check the chassis bolts one-by-one with a torque wrench, and

tighten it to the specified torque if loose ;

2.1.17. Check the engine while idling: Check the engine’s working condition,electronic fuel

injector parameters and exhaust whiling idling, and adjust it, if necessary;

2.1.18. Lower the vehicle, and take off the “four-piece series” and the protective covers of left and

right fenders and the front protective cover;

2.1.19. Trial driving: Check the display status of combination instrument, the working condition

of four-door regulator, and the function of the steering, braking and gear shifting

mechanisms, pay attention to the abnormal sound from the engine and body, and examine

and repair it, if necessary;

2.1.20. Look around the vehicle, and wash it if there is no abnormal symptom, then deliver the

vehicle to its owner.

2.2. Standard 15,000 KM maintenance work procedure

2.1.1. Receive the vehicle to be maintained, wear the “four-piece series” (seat cover, steering

wheel cover, shift lever cover, driver’s foot pad) on the vehicle, drive the vehicle to the

lifting jack, and support the vehicle;

2.1.2. Prepare for the related tools and special devices;

2.1.3. Wear the left and right fenders protective covers and front protective covers on the vehicle

to be maintained;

2.1.4. Replace the engine oil, and oil cleaner(refer to the replacement above-mentioned in this

manual);

2.2.5. Check transmission oil: Check the leakage of transmission oil viewing from the engine

compartment; and then lift up the vehicle and check the leakage of transmission oil viewing

from the bottom of vehicle;

2.2.6. Check the free travel of clutch,and regulate it, if necessary;

2.2.7. Check the oil/fluid: Check the levels of brake fluid, antifreeze fluid, glass cleaning fluid

and power steering oil, and the leakage of the related pipelines;

2.2.8. Battery: Check the electrolyte level, and refill the distilled water if necessary (the

maintenance-free battery exclusive);

2.2.9. Wiper and cleaning equipment: Check its working condition;

2.2.10. Check the door lock, hinge and stopper: Check the working condition of all door locks,

hinges and stoppers, and appropriately add the lubrication oil if there is abnormal sound or

the resistance is big;

2.2.11. Check the air cleaner: Clean the element (with the high-pressure air), and replace it, if

necessary;

2.2.12. Check the dislocation or damage of the dust cap of constant velocity joint;

2.2.13. Check the damage of steering tie rod end and its dust cap;

2.2.14. Ball pin: Check its looseness and scratch;

2.2.15. Check the thickness of brake lining/shoe, and replace it, if necessary. The standard

thickness of front brake lining is 10 mm, with the serviceability limit of 3 mm, and the

remaining thickness while the brake lining thickness limit shall not be less than 3 mm; and

the standard thickness of rear brake lining is 5 mm, with the serviceability limit of 1 mm,

and the remaining thickness while brake lining thickness limit shall not be less than 1 mm;

2.2.16. Brake disc/drum: Check its working condition, the damage, and replace it, if necessary;

2.2.17. Hand brake: Check its travel, and regulate it, if necessary;

2.2.18. Tire position change: Change the position of tires according to the description as shown in

the figure, and note that the status of tire of the front wheel shall be better than that of rear

wheel after position changing;

Content .. 70 71 72 73 ..