|
|
|
PLASTIC AND COATED PARTS
Clean interior plastic parts with a damp
cloth (if possible made from microfibre),
and a solution of water and neutral,
non-abrasive detergent. To clean oily or
persistent stains, use specific products
free from solvents and designed to
maintain the original appearance and
colour of the components.
Remove any dust using a microfibre
cloth, if necessary moistened with water.
The use of paper tissues is not
recommended as these may leave
residues.
50)
GENUINE LEATHER PARTS
(for versions/markets, where provided)
Use only water and mild soap to clean
these parts. Never use alcohol or
alcohol-based products. Before using a
specific product for cleaning interiors,
make sure that it does not contain
alcohol and/or alcohol based substances.
WARNING
144)
Never use flammable products, such as
petrol ether or rectified petrol to clean the
inside of the car.The electrostatic charges
which are generated by rubbing during the
cleaning operation may cause a fire.
145)
Do not keep aerosol cans in the car:
they might explode. Aerosol cans must not
be exposed to a temperature exceeding
50°C. When the vehicle is exposed to
sunlight, the internal temperature can
greatly exceed this value.
146)
There must be no obstacles on the
floor underneath the pedals; make sure that
mats are always flat and do not interfere
with the pedals.
IMPORTANT
50)
Never use alcohol, petrols and
derivatives to clean the dashboard and
instrument panel lens.
142
SERVICING AND MAINTENANCE
IDENTIFICATION DATA
The identification data of the vehicle are:
VIN plate;
Chassis marking;
Bodywork paint identification plate;
Engine marking.
VEHICLE IDENTIFICATION
NUMBER (VIN) PLATE
This plate is fitted to the engine
compartment front crossmember and
contains the following identification data
fig. 124:
B: Type-approval number
C: Vehicle type identification code
D: Chassis number
E: Maximum permitted weight of vehicle
fully laden
F: Maximum permitted weight of vehicle
fully laden plus trailer
G: Maximum permitted weight on front
axle
H: Maximum permitted weight on second
(rear) axle
I: Engine type
L: Bodywork version code
M Spares number
N: Smoke opacity index (for diesel
engines)
124
A0K0024C
144
TECHNICAL SPECIFICATIONS
A: Name of Manufacturer
VEHICLE IDENTIFICATION
NUMBER
This is printed on the passenger
compartment floor, next to the front
right seat.
Slide forward hatch 1 fig. 125 to access.
The marking includes:
vehicle type (ZAR 940000);
chassis serial number.
ENGINE MARKING
It is stamped on the cylinder block and
includes the type and the engine serial
number.
125
A0K0750C
145
ENGINE
GENERAL INFORMATION
1.4 Turbo petrol 120 HP
1.4 Turbo Petrol/LPG 120 HP
Engine code
940B7000
940B7000
Cycle
Otto
Otto
Number and position of cylinders
4 in line
4 in line
Piston bore and stroke (mm)
72.0 × 84.0
72.0 × 84.0
Total displacement (cm³)
1368
1368
Compression ratio
9.8
9.8
LPG
PETROL
Maximum power (EC) (kW)
88
88
88
Maximum power (EEC) (HP)
120
120
120
corresponding engine speed (rpm)
5000
5000
5000
Maximum torque (EC) (Nm)
215
215
215
Maximum torque (EC) (kgm)
22
22
22
corresponding engine speed (rpm)
2500
2500
2500
Spark plugs
NGK IKR9J8
NGK IKR9J8
NGK IKR9J8
Fuel
Unleaded petrol 95 R.O.N. (EN
228 specifications)
LPG for motor
vehicles
(EN589 Specification)
Unleaded petrol
95 R.O.N. (EN
228 specifications)
146
TECHNICAL SPECIFICATIONS
|
|
|