|
|
Fig. 10: Locating The Data Link Connector (DLC) 3. Update the PCM according to the procedures described on the HIM label. If the software in the PCM is the latest, replace the PCM. How to Substitute the PCM 1. Connect the HDS to the DLC. 2. Turn the ignition switch OFF. 3. Jump the SCS line with the HDS. 4. Remove the PCM, and install a known-good PCM. 5. Rewrite the immobilizer code with the PCM replacement procedure in the HDS; this will allow you to start the engine. 6. After completing your test, reinstall the original PCM and rewrite the immobilizer code with the PCM replacement procedure in the HDS again.
2004 Acura TSX 2004 AUTOMATIC TRANSMISSIONS Diagnosis - MCTA 5-Speed
|