Acura TSX / Honda Accord CL. Manual - part 828

Fig. 13: Disconnecting The Hose From The Vacuum Line 

26. Remove the front mount stop (D) and clamp bracket (E), and remove the front mount bolt (F).  

27. Insert a 6 mm Allen wrench (A) in the top of the ball joint pin (B), and remove the nuts (C), then separate 

the stabilizer link (D) from the lower arms (E). 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

  

 

Fig. 14: Removing Components 

28. Remove the cotter pins (F), castle nuts (G), damper pinch bolt (H), self-locking nut (I), bolt (J), and 

damper forks (K), then separate the ball joints from the lower arms (see BALL JOINT ).  

29. Remove the exhaust pipe A and its mount. 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

  

 

Fig. 15: Removing The Exhaust Pipe 

30. Remove the steering gearbox heat shield (A), and remove the bolt (B) securing the power steering fluid 

line bracket. 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

  

 

Fig. 16: Removing The Steering Gearbox Heat Shield & Removing The Bolt Securing The Power 
Steering Fluid Line Bracket 

31. Remove the power steering fluid line from its clamps on the front subframe. 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX